HP m7267c, m7248n, m7246n Working with Audio CDs, Verifying audio disc recorded without errors

!

IMPORTANT: HP supports the lawful use of technology and does not endorse or encourage the use of our products for purposes other than those permitted by copyright law.

Working with Audio CDs

Sonic DigitalMedia Plus enables you to create audio CDs that play in your car or home CD player, and on PCs. You can create two main types of music CDs:

■Uncompressed — Typical CD format like you would purchase on a commercial CD. This type of CD will hold 10 to 20 songs depending on their length.

Uncompressed files can be burned on CD-Rs (which play in most home and car stereos, DVD players, and computers) or CD-RWs (which play only in some stereos, DVD players, and computers).

The procedure for creating this type of CD is described in “Creating audio CDs” on page 81.

■Compressed — Files are burned to a disc using a compressed file format (MP3, WMA, or M4A). The smaller file format enables you to fit approximately ten times as many songs onto the disc (depending on length and format).

Compressed files can be burned to CD-Rs, CD-RWs, DVD+Rs, DVD+RWs, DVD-Rs and DVD-RWs (select models only). Compressed files

can only be played on computers, CD players, or DVD players that support the file format you use to create the disc (MP3 is most commonly supported). For file format compatibility, check the documentation for the device where you intend to play the disc. You may hear a slight loss of sound quality using compressed audio files.

The procedure for creating this type of CD is described in “Creating jukebox discs” on page 82.

For more compatibility information, see “Disc Features and Compatibility Table” on page 89.

Both Sonic programs create closed-sessionmusic CDs, which means you must record all music files on one CD in one recording session. Music files can be recorded repeatedly on a rewritable CD-RW disc, but all previously recorded files must be erased first. CD-R discs cannot be erased.

.

Verifying audio disc recorded without errors

When copying or burning audio files to CD, it is	This write verification feature is enabled by default.
recommended that you use Sonic DigitalMedia Plus
because it includes a feature that confirms that your
disc has been created without errors.

To check the status of the write verification feature in Sonic DigitalMedia Plus:

1 Open the Sonic DigitalMedia Plus program by clicking Start, All Programs, Sonic, and then DigitalMedia Home.

2 Click Tools, and then Options.

3 In the Options window, click Copy.

4 Ensure that the Verify copied data discs (slower) box is checked.

5 Click OK.

80 HP Media Center PC Software Guide