HP m7088a, m7188d, m7177d, m7181.uk, m7183c, m7177c Replacing the Battery, Installing an Add-in Card

Page 15

5Loosen the screw on the card you are replacing. Hold the card at the top and carefully pull the card straight out of the add-in card slot.

Installing an Add-in Card

1Align the edge of the add-in card with the slot on the chassis and gently but firmly press the card straight down into the add-in card slot. The whole connector should be seated properly in the card slot.

2Attach the screw to secure the card.

3Connect any external or internal cables attached to the card.

4Complete the procedures to replace the side panel and close the PC. See “Opening and Closing the PC” on page 1.

NOTE: If the new card or device isn’t working, read through the card manufacturer’s installation instructions, and recheck all connections, including those to the card, power supply, keyboard, and monitor.

Replacing the Battery

A lithium battery on the motherboard provides backup power for the PC’s timekeeping capability.

When the battery starts to weaken, the date and time may be incorrect. If the battery fails, replace it with a CR2032 lithium battery (3 volt, 220mAH rating) or an equivalent battery.

WARNING: There is danger of explosion if the battery is incorrectly replaced. Replace only with the same, or equivalent, type of battery. Discard used batteries according to the manufacturer’s instructions.

1Complete the procedures to prepare the PC and to remove the side panel. See “Opening and Closing the PC” on page 1.

2Gently lay the PC on its side.

3Remove any cabling, if necessary, to reach the battery.

4Remove any memory modules, if necessary, to reach the battery. See “Adding Memory” on page 9.

5Press the latch away from the battery and lift the battery from the socket to release the battery.

6Install the new CR2032 battery in the socket, with the positive (+) side facing the latch.

7Replace memory modules or cables you removed.

8Set the chassis upright.

9Complete the procedures to replace the side panel, and to close the PC. See “Opening and Closing the PC” on page 1.

Upgrading and Servicing Guide 11

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Upgrading and Servicing Guide USA Table of Contents Iv Upgrading and Servicing Guide Safety Information Opening and Closing the PCPreparing the PC Before Opening the PC After Closing the PCRemoving the Side Panel Replacing the Side Panel Removing the Front PanelReplacing the Front Panel Removing Replacing Drives Locating Components Inside the PCRemoving an Optical Drive Removing a Memory Card Reader Replacing or Adding an Optical DriveRemoving a Hard Disk Drive Installing a Memory Card ReaderPage Replacing a Hard Disk Drive Installing a Memory Module Adding MemoryRemoving a Memory Module Removing an Add-in Card Removing or Installing an Add-in CardInstalling an Add-in Card Replacing the BatteryPrinted
Related manuals
Manual 50 pages 41.56 Kb Manual 2 pages 37.91 Kb Manual 110 pages 56.66 Kb Manual 1 pages 57.42 Kb Manual 16 pages 509 b Manual 174 pages 17.06 Kb Manual 76 pages 15.32 Kb Manual 18 pages 28.4 Kb Manual 16 pages 22.5 Kb Manual 22 pages 57.9 Kb Manual 122 pages 62.87 Kb Manual 74 pages 57.44 Kb Manual 1 pages 26.85 Kb Manual 1 pages 34.67 Kb Manual 10 pages 44.73 Kb Manual 22 pages 56.98 Kb Manual 1 pages 5.86 Kb Manual 1 pages 8.57 Kb

m7088a, m7050e (PX154AV), m7181.uk, m7087c, m7077c specifications

The HP a1129n, m7100y, a1123c, a1132n, and m7188d are a lineup of HP desktop computers tailored for a variety of users, emphasizing performance, reliability, and innovative features. Each model serves its unique audience, making them suitable for both home and office environments.

The HP a1129n is a versatile desktop designed for home users and casual gamers. It typically features an AMD Athlon 64 processor, offering a solid balance between power and energy efficiency. With integrated graphics, this model is capable of handling everyday tasks, such as web browsing and media playback, without lag. The a1129n often includes ample storage options, commonly a 250GB hard drive, ensuring users have enough space for files and multimedia.

Next, the HP m7100y is engineered for more demanding users who require efficiency. This model is built around Intel’s Pentium 4 processors and is equipped with a more advanced graphics card, making it suitable for light gaming and graphic design tasks. The m7100y typically supports a range of RAM options, increasing multitasking capabilities. Additionally, this desktop often features a DVD writer, enhancing its multimedia capabilities for burning and playing discs.

The HP a1123c stands out with its compact design. Targeting users with limited space, it incorporates Intel processors, providing reliable performance for everyday applications. With integrated wireless connectivity, users can easily access the internet without physical constraints. The a1123c balances design and functionality, embodying HP’s commitment to user-centered technology.

The HP a1132n is ideal for users requiring robust performance. Featuring dual-core processing capabilities, this model excels in multitasking scenarios. It offers enhanced graphics performance, making it well-suited for multimedia editing tasks and casual gaming. Users appreciate its easy upgradeability, allowing for future enhancements as needs grow.

Finally, the HP m7188d is a powerhouse among its peers, featuring high-end components suited for heavy gaming and design work. This model typically integrates a dedicated graphics card and a faster processor, allowing for a smooth performance in resource-intensive applications. The m7188d stands as a prime option for power users seeking reliability and speed.

In conclusion, each of these HP desktops, from the a1129n to the m7188d, offers distinct features and capabilities tailored to different user needs. Whether for casual use, everyday productivity, or demanding tasks, HP has successfully designed a diverse range of desktops to meet modern computing requirements.
Top Page Image Contents