HP m400y (D7222P) manual Operating Specifications, Regulatory and Safety Information

Page 8

Operating Specifications

Electrical ratings:

Models: 100 series, 300 series,

 

400 series, 500 series, 600 series,

 

700 series, and 800 series,

 

a000 series, t000 series,

 

m000 series

 

100–127 V￿/200–240 V￿,

 

4/2 A, 50/60 Hz

Operating temperature:

5° to 35° C

 

(On models with DVD+RW/+R

 

drives, the operating

 

temperature is 5° to 30° C)

Storage temperature:

–40° to 70° C

Operating humidity:

15 to 80% @ 26° C

Storage humidity:

90% @ 65° C (non-condensing)

Operating altitude:

0–2286 m

Storage altitude:

0–4572 m

Batteries are delivered with this product. When empty, do not throw them away but collect as small chemical waste.

Bij dit produkt zijn batterijen geleverd. Wanneer deze leeg zijn, moet u ze niet weggooien maar inleveren als KCA.

Regulatory and Safety Information

WARNING: The HP Pavilion is heavy; be sure to use ergonomically correct lifting procedures when moving the computer.

WARNING: Electrostatic discharge (ESD) can damage disk drives, add-in cards, and other components. If an ESD station is not available, wear a wrist strap attached to a metal part of the computer. Place cards on a conductive foam pad or inside the conductive wrapper they came in; do not place the cards on top of the wrapper.

WARNING: Do not operate the system with the cover removed. Always replace the cover before turning on the system.

WARNING: Please read the “Additional Safety Information” located later in this document before installing and connecting your system to the electrical power system.

WARNING: Using the wrong type of memory module could damage the system.

WARNING: Do not pull the memory module out of the socket. Use the retaining clips to eject the module.

WARNING: Do not overload the system by installing add-in cards that draw excessive current. The system is designed to provide 2 amps (average) of +5 V power for each board/card in the computer. The total +5 V current draw in a fully loaded system (one with all add-in card slots filled) must not exceed the total number of slots multiplied by 2 amps.

WARNING: Be careful of the sharp edges on the expansion slot cover.

WARNING: There is danger of explosion if the battery is incorrectly replaced. Replace only with the same, or equivalent, type of battery. Discard used batteries according to the manufacturer’s instructions.

8

Image 8 Contents
Warranty Support guide Where to Get Help Software SupportHP Support Web site HP Customer Care Center HP Registration Web siteWarranty and License Information When should I contact HP online service and support?When should I contact HP phone service and support? Contacting HP Customer Care HP Support ProcessLegal Language Send-In Repair ServiceProtect Your Investment Obtaining Hardware Warranty Repair Service Consumer Replaceable Parts ServiceSend-In Repair Service Customer ResponsibilitiesHP Software Product License Agreement SoftwareDeclaration of Conformity Operating Specifications Regulatory and Safety InformationFCC Regulatory and Safety Information USA Only Energy Star ComplianceStatement of Fax Branding Consumer Information and FCC RequirementsAdditional Safety Information AC Power Safety WarningCanada Department of Communications DOC Notice DOC Statement Canada OnlyLithium Battery Caution Laser Safety Statement TV Antenna Connectors ProtectionPower Lines Antenna Grounding Reference
Related manuals
Manual 1 pages 21.43 Kb Manual 4 pages 37.22 Kb Manual 12 pages 3.89 Kb Manual 4 pages 20.83 Kb Manual 24 pages 29.75 Kb