3Make sure the card is pressed all the way into the slot, and then gently push down on the card to snap it into place.
4Lower the memory cover into the chassis and slide it into place.
Abaissez le cache de la mémoire dans le châssis et
5Tighten the memory cover screw.
Serrez la vis du cache de la mémoire.
6Make sure that the wire at the bottom of the computer is held by the retaining clasps.
7Position the back cover over the back of the computer, aligning it first at the top and then at the bottom.
1
2
Placez le capot arrière sur le flanc arrière de l’ordinateur en l’alignant d’abord sur la partie supérieure, puis la partie inférieure.
| 25 |