Introduction, Inspection, Description | Rolls VP530 specification

INTRODUCTION

Thank you for your purchase of the Bellari VP530 Tube Phono Preamp. The VP530 is designed to amplify an RIAA equalized phono signal to a Hi-Fi level signal, and is intended for magnetic pickups. Since the unit utilizes tube circuitry, the resulting output signal is more warm and musical than solid state preamplifiers.

INSPECTION

1. Unpack and Inspect the VP530 package

Your VP530 was carefully packed at the factory in a protective carton. Nonetheless, be sure to examine the unit and the carton for any signs of damage that may have occurred during shipping. If obvious physical damage is noticed, contact the carrier immediately to make a damage claim. We suggest saving the shipping carton and packing materials for safely transporting the unit in the future.

2. we recommend registering on-line at www.rolls.com.

DESCRIPTION

GROUND CONNECTOR: Connects to the Ground of the phonograph.

INPUT: Stereo RCA jacks for connection to the phonograph.

OUTPUT: Stereo RCA jacks for connection to a stereo system or ampli- fier.

STEREO HEADPHONE/LINE OUTPUT: 1/4" Tip-Ring-Sleeve jack for con- nection to any standard pair of headphones or earphones.

PWR INPUT: ROLLS PSU115 15V DC 700mA.

RUMBLE FILTER: High pass filter - eliminates frequencies under 20Hz.

MUTE: When pressed in - mutes the RCA outputs. The Headphone Out- put will still have signal present.

FLAT/RIAA: Switches from an RIAA EQ'ed output to a FLAT output.

OUTPUT LEVEL: Adjusts the amount of signal to the RCA Outputs.

HEADPHONE LEVEL: Adjusts the amount of signal to the Headphone/ Line Output.

USB: USB output for connection to a computer or other usb device input.

IMPORTANT USB NOTE:

When connecting the USB, your computer should recognize the connection. We offer no support for using or setting up the USB, or interfacing with applications. Please contact your dealer regarding these issues.

CONNECTION/OPERATION

Connect your turntable to the VP530 as shown. The Outputs may be connected to an amplifier, recording device such as a cassette recorder or computer sound-card, or a tuner Aux input. Only use a Tip-Ring- Sleeve stereo plug in the Headphone Output. CONNECTING A MONO PLUG IN THIS JACK MAY RESULT IN DAMAGE TO THE VP530.

Connect the PSU115 to the unit and an AC outlet or power strip.

Play a record on the turntable and adjust the Output Level and Head- phone Level controls to the desired amounts.

Switch in the Rumble Filter to eliminate very low frequencies if needed. Press in the Mute switch when you wish to mute the RCA outputs of the VP530 (the Headphone Output will still be active).

VERY IMPORTANT NOTES:

First of all - turntables and tube equipment have a certain level of noise. That's why the two technologies are essentially obsolete.

The VP530 is intended for use with Moving Magnet cartridges, not Moving Coil. While a Moving Coil cartridge will work, you will be re- quired to turn up the volume of the unit as well as your receiver/ampli- fier causing an increase in noise.

VP530 specifications

The Rolls VP530 is a state-of-the-art aircraft engine that has made waves in the field of aviation due to its innovative design and advanced technologies. As a product of Rolls Royce, a company renowned for its excellence in engineering, the VP530 is tailored for versatile applications, including general aviation, business jets, and small regional aircraft.

One of the standout features of the Rolls VP530 is its lightweight composite structure, which significantly enhances fuel efficiency and performance. This engine utilizes advanced materials that reduce overall weight while maintaining structural integrity, allowing for an optimal power-to-weight ratio. The lightweight design translates to lower operational costs and improved environmental performance.

Another significant innovation is the engine's advanced turbofan technology. The VP530 is equipped with a high bypass ratio, which not only contributes to quiet operation but also enhances overall fuel efficiency. This efficiency is partly achieved through the incorporation of advanced aerodynamic designs that minimize drag, allowing the engine to operate optimally in various flight conditions.

The VP530 also boasts an advanced digital engine control system. This system enhances engine performance monitoring and management, allowing for real-time adjustments to maximize efficiency and safety. The digital control system integrates seamlessly with aircraft avionics, ensuring that pilots can access critical performance data at their fingertips. This feature also supports predictive maintenance, allowing operators to predict potential issues before they become critical, thus minimizing downtime.

The engine is designed with maintainability in mind. Its modular design allows for easier access to key components, which simplifies maintenance procedures and reduces the time required for inspections and repairs. This user-friendly approach is crucial for operators who seek to minimize operational costs and enhance aircraft availability.

Furthermore, the Rolls VP530 is built with stringent safety standards in mind. It undergoes rigorous testing to ensure reliability and compliance with international aviation regulations. The engine's design incorporates multiple redundancy features to enhance safety during flight operations, making it an ideal choice for various aviation applications.

In summary, the Rolls VP530 stands out in the aviation industry with its lightweight design, advanced turbofan technology, digital engine control, modular maintainability, and rigorous safety standards. This engine not only meets the demands of modern aviation but also sets new benchmarks in performance and operational efficiency, solidifying its reputation as a leading choice for aircraft manufacturers and operators alike.