Removable Media Write, Primary IDE Controller

Heading	Option	Description

Storage	Options(continued)	Removable Media Write
(continued)		Enables/disables ability to write data to
		Enables/disables ability to write data to
		removable media.
		✎ This feature applies only to legacy
		diskette, IDE LS-120 Superdisk,
		IDE LS-260 Superdisk and
		IDE PD-optical drives.
		✎ After saving changes to Removable
		Media Write, the computer will restart.
		Turn the computer off, then on, manually.
		Primary IDE Controller
		Allows you to enable or disable the primary
		IDE controller.
		Secondary IDE Controller
		Allows you to enable or disable the
		secondary IDE controller.
		Diskette MBR Validation
		Allows you to enable or disable strict
		validation of the diskette Master Boot
		Record (MBR).
		✎ If you use a bootable diskette image that
		you know to be valid, and it does not boot
		with Diskette MBR Validation enabled,
		you may need to disable this option in
		order to use the diskette.

	IDE DPS Self-Test	Allows you to execute self-tests on IDE hard
		drives capable of performing the Drive
		Protection System (DPS) self-tests.
		✎ This selection will only appear when at
		least one drive capable of performing the
		IDE DPS self-tests is attached to the
		system.

Support for Computer Setup options may vary depending on your specific hardware configuration.

8	Computer Setup (F10) Utility Guide

Removable Media Write