Computer Setup (F10) Utility Guide
Computer Setup (Continued)
Heading | Option | Description |
|
|
|
Advanced* | • After Power Loss (off/on): | |
(continued) | (continued) | After power loss, if you connect your |
|
| computer to an electric power strip and |
*These options should be used by
advanced users only.
would like to turn on power to the computer using the switch on the power strip, set this option to “on.”
✎ If you turn off power to your computer using the switch on a power strip, you will not be able to use the suspend/sleep feature or the Remote Management features.
• I/O APIC Mode (enable/disable). Enabling this feature will allow Microsoft Windows Operating Systems to run optimally. This feature must be disabled for certain
• USB Buffer @ Top of Memory (enable/disable). Enabling this feature places USB memory buffers at the top of memory. The advantage is that some amount of memory below 1 MB is freed up for use by option ROMs. The disadvantage is that a popular memory manager, HIMEM.SYS, does not work properly when USB buffers are at top of memory AND the system has 64 MB or less of RAM.
Support for Computer Setup options may vary depending on your specific hardware configuration.
20 | Computer Setup (F10) Utility Guide |