HP D310 Micro manual Replacing the hard drive

Page 14

Upgrading and replacing hardware

Replacing the hard drive

WARNING For your safety, disconnect the power cord and all external cables.

1Switch off the PC and remove the PC’s cover and front panel. Refer to page 10.

2Locate the hard drive and taking hold of the two large plastic latches that secure the bay, swing the device bay upwards.

Right latch

Primary Hard drive

Left latch

3Detach the data and power cables from the hard drive.

4Standing at the rear of the PC, press the two tabs securing the hard drive inwards and carefully slide the drive tray towards you and out of the PC.

Rear of the PC

14 Evo D310 Micro Desktop

Image 14
Contents Upgrade guide Important Ergonomic Information Information Roadmap Discover and use your product Finding Information Important Safety Information Choosing a Comfortable WorkspaceTable of Contents Page Upgrading and replacing hardware Removing and replacing the pc’s cover Inside the Evo D310 Micro Desktop Upgrading or replacing memory System board cables and connectors Replacing the hard drive Evo D310 Micro Desktop Installing optical drives Configuring an IDE device after installation Replacing the floppy disk drive Evo D310 Micro Desktop Installing or replacing an AGP or PCI accessory card Replacing the processor Evo D310 Micro Desktop Replacing the system board Configuration Switches Replacing the power supply unit Replacing the battery BatteryPage Created in France, June
Related manuals
Manual 26 pages 38.99 Kb Manual 12 pages 53.56 Kb