Upgrading and replacing hardware
Replacing the processor
1Switch off the PC and remove the PC’s cover. Refer to page 10.
2Locate the processor. It will be covered by a heatsink.
processor (covered by heatsink)
3Remove the screws from the heatsink and disconnect the processor fan cable..
processor fan connector and cable
screws | screws |
4Remove the heatsink. (If the processor is stuck to the heatsink, carefully detach the processor from the heatsink, using a flat tool such as a screwdriver).
5Lift the processor socket’s lever and carefully remove the old processor. Carefully insert the new processor, then lower the lever back into place.