HP D300 manual CD-ROM Drive Precautions, Operation, Cleaning, Safety

Page 54

Routine Computer Care and Shipping Preparation

CD-ROM Drive Precautions

Be sure to observe the following guidelines while operating or cleaning your CD-ROM drive.

Operation

Do not move the drive during operation. This may cause it to malfunction during reading.

Avoid exposing the drive to sudden changes in temperature, as condensation may form inside the unit. If the temperature suddenly changes while the drive is on, wait at least one hour before you turn off the power. If you operate the unit immediately, it may malfunction while reading.

Avoid placing the drive in a location that is subject to high humidity, extreme temperatures, mechanical vibration, or direct sunlight.

Cleaning

Clean the panel and controls with a soft, dry cloth or a soft cloth lightly moistened with a mild detergent solution. Never spray cleaning fluids directly on the unit.

Avoid using any type of solvent, such as alcohol or benzene, which may damage the finish.

Safety

If any object or liquid falls into the drive, immediately unplug the computer and have it checked by an authorized Compaq service provider.

F-2

Hardware Reference Guide

Image 54
Contents Hardware Reference Guide Page Contents Electrostatic Discharge Product Features Standard Configuration FeaturesFront Panel Components Front Panel ComponentsRear Panel Components Rear Panel ComponentsEasy Access Keyboard Compaq Easy Access Keyboard ComponentsEasy Access Software Reprogramming the Easy Access ButtonsLocking and Unlocking the Easy Access Buttons Easy Access Paper Icon Insert Special Mouse FunctionsWindows Logo Key Serial Number Location Product Features Hardware Upgrades Serviceability FeaturesInstallation Sequence Hardware Upgrades Removing the Computer Cover Replacing the Computer Cover Removing the Front Bezel Removing Bezel BlanksInstalling Additional Memory DIMMsInstalling DIMMs Installing a Dimm Installing or Removing an Expansion Card Removing an Expansion Slot CoverRemoving or Installing an Expansion Card Hardware Upgrades Drive Positions Removing a Drive from the Drive Bay Installing Additional Drives Hardware Upgrades Installing a Hard Drive into a 3.5-inch Drive Bay Removing the Power Switch Bracket Connect the signal 1 and power 2 cables to the hard drive Specifications Compaq Evo Desktop Intel PentiumCompaq Evo Desktop Intel Pentium III/Celeron 145 W Specifications Hard Drive Installation Guidelines Using the Cable-Select Feature with Ultra ATA DevicesGuidelines for Installing Ultra ATA Devices Guidelines for Using Scsi Devices Scsi DevicesHard Drive Installation Guide Guidelines for Installing Optional Scsi Devices Scsi ControllersUsing a Scsi Cable Using SCSISelect with Scsi DevicesScsi Cables Choosing the Quiet Drive Options Hard Drive Installation Guide Battery Replacement Type Removing a Coin Cell Battery Type Replacing a Coin Cell Battery Type Installing a Security Lock Security Lock ProvisionsInstalling Compaq Type 2 Security Bracket may vary by model Security Lock Provisions Installing a Kensington Cable Lock may vary by model Electrostatic Discharge Preventing Electrostatic Damage Grounding Methods Electrostatic Discharge Routine Computer Care Shipping Preparation Routine Computer CareSafety CD-ROM Drive PrecautionsCleaning OperationShipping Preparation Routine Computer Care and Shipping Preparation Index Quiet Drive B-7Windows Logo Key
Related manuals
Manual 57 pages 11.81 Kb Manual 25 pages 50.99 Kb Manual 12 pages 8.14 Kb