HP DX2250 manual Removing a 3.5 Drive Bezel Blank, 4Removing a 3.5 Bezel Blank Hardware Upgrades

Page 12

Removing a 3.5" Drive Bezel Blank

If the computer was not shipped with a device in the 3.5" bay, the bay will be covered by a bezel blank. If you install a device in the 3.5" bay, you must first remove the bezel blank.

1.Turn off the computer properly through the operating system, then turn off any external devices.

2.Disconnect the power cord from the power outlet and the computer, and disconnect any external devices.

3.Remove the access panel and front bezel. Refer to Removing the Computer Access Panel and Front Bezel on page 3.

4.While facing the inside of the front bezel, press outward on the two retaining tabs on each side of the bezel blank (1) and pull the bezel blank inwards to remove it (2).

Figure 2-4Removing a 3.5" Bezel Blank

NOTE To install a 3.5" bezel blank, press the blank inward from inside the front bezel so that it snaps into place.

6 Chapter 2 Hardware Upgrades

ENWW

Image 12
Contents Hardware Reference Guide dx2250 Microtower Model Hardware Reference Guide About This Book Iv About This Book Table of contents Enww Product Features Standard Configuration FeaturesServiceability Features Enww Hardware Upgrades Removing the Computer Access Panel and Front Bezel2Removing the Front Bezel Hardware Upgrades Removing a 5.25 Drive Bezel Blank 3Removing a 5.25 Bezel Blank4Removing a 3.5 Bezel Blank Hardware Upgrades Removing a 3.5 Drive Bezel BlankInstalling Additional Memory DIMMsDDR2-SDRAM DIMMs Installing DIMMs 5Installing a Dimm Hardware UpgradesEnww Installing an Expansion Card Installing an Expansion Card Replacing or Upgrading a Drive Locating Drive PositionsRemoving a 5.25 Optical Drive Removing a 3.5 Media Card Reader or Diskette Drive Device Retainer Screws Guide ScrewsRemoving a 3.5 Hard Drive 11Removing a 3.5 Hard DriveInstalling a Security Lock 12Installing a Security Lock Hardware UpgradesBattery Replacement Type 2Removing and Replacing a Coin Cell Battery Type Enww Computer Operating Guidelines and Routine Care Optical Drive Precautions CleaningSafety Shipping PreparationElectrostatic Discharge Preventing Electrostatic DamageGrounding Methods
Related manuals
Manual 36 pages 53.64 Kb Manual 23 pages 45.39 Kb Manual 17 pages 5.48 Kb Manual 22 pages 40.83 Kb