HP DX2250 manual Optical Drive Precautions, Shipping Preparation, Operation, Cleaning, Safety

Page 28

Optical Drive Precautions

Be sure to observe the following guidelines while operating or cleaning the optical drive.

Operation

Do not move the drive during operation. This may cause it to malfunction during reading.

Avoid exposing the drive to sudden changes in temperature, as condensation may form inside the unit. If the temperature suddenly changes while the drive is on, wait at least one hour before you turn off the power. If you operate the unit immediately, it may malfunction while reading.

Avoid placing the drive in a location that is subject to high humidity, extreme temperatures, mechanical vibration, or direct sunlight.

Cleaning

Clean the panel and controls with a soft, dry cloth or a soft cloth lightly moistened with a mild detergent solution. Never spray cleaning fluids directly on the unit.

Avoid using any type of solvent, such as alcohol or benzene, which may damage the finish.

Safety

If any object or liquid falls into the drive, immediately unplug the computer and have it checked by an authorized HP service provider.

Shipping Preparation

Follow these suggestions when preparing to ship the computer:

1.Back up the hard drive files on PD discs, tape cartridges, CDs, or diskettes. Be sure that the backup media is not exposed to electrical or magnetic impulses while stored or in transit.

NOTE The hard drive locks automatically when the system power is turned off.

2.Remove and store all removable media.

3.Insert a blank diskette into the diskette drive to protect the drive while in transit. Do not use a diskette on which you have stored or plan to store data.

4.Turn off the computer and external devices.

5.Disconnect the power cord from the electrical outlet, then from the computer.

6.Disconnect the system components and external devices from their power sources, then from the computer.

NOTE Ensure that all boards are seated properly and secured in the board slots before shipping the computer.

7.Pack the system components and external devices in their original packing boxes or similar packaging with sufficient packing material to protect them.

22 Chapter 4 Computer Operating Guidelines, Routine Care and Shipping Preparation

ENWW

Image 28
Contents Hardware Reference Guide dx2250 Microtower Model Hardware Reference Guide About This Book Iv About This Book Table of contents Enww Standard Configuration Features Product FeaturesServiceability Features Enww Hardware Upgrades Removing the Computer Access Panel and Front Bezel2Removing the Front Bezel Hardware Upgrades Removing a 5.25 Drive Bezel Blank 3Removing a 5.25 Bezel Blank4Removing a 3.5 Bezel Blank Hardware Upgrades Removing a 3.5 Drive Bezel BlankDIMMs Installing Additional MemoryDDR2-SDRAM DIMMs Installing DIMMs 5Installing a Dimm Hardware UpgradesEnww Installing an Expansion Card Installing an Expansion Card Replacing or Upgrading a Drive Locating Drive PositionsRemoving a 5.25 Optical Drive Removing a 3.5 Media Card Reader or Diskette Drive Device Retainer Screws Guide ScrewsRemoving a 3.5 Hard Drive 11Removing a 3.5 Hard DriveInstalling a Security Lock 12Installing a Security Lock Hardware UpgradesBattery Replacement Type 2Removing and Replacing a Coin Cell Battery Type Enww Computer Operating Guidelines and Routine Care Optical Drive Precautions CleaningSafety Shipping PreparationPreventing Electrostatic Damage Electrostatic DischargeGrounding Methods
Related manuals
Manual 36 pages 53.64 Kb Manual 23 pages 45.39 Kb Manual 17 pages 5.48 Kb Manual 22 pages 40.83 Kb