HP dx2400 manual Computer Setup-Main

●Boot

●Exit

Use the arrow keys to select the appropriate heading, then press Enter. Use the arrow (up and down) keys to select the option you want, then press Enter. To return to the previous screen, press Esc.

CAUTION: Do NOT turn the computer power OFF while the ROM is saving the Computer Setup (F10) changes because the CMOS could become corrupted. It is safe to turn off the computer only after exiting the F10 Setup screen.

Computer Setup—Main

NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration.

Table 1 Computer Setup—Main

Option	Description
System Time	Allows you to set system time.
System Date	Allows you to set system date.
Language	Allows you to select language.
Floppy Diskette A:	Allows you to set drive A to:
	●	Disabled
	●	1.44 MB 3.5”
	●	Not Installed
1st Drive	For each, allows you to:
2nd Drive	●	(view only)
3rd Drive		◦	Capacity (Size - HDD only)
4th Drive		◦	Transfer Mode
		◦	SATA Speed
		◦	NCQ
	● Smart Support - run HDD self-test for selected channel:
		◦	SMART Status Check
		◦	SMART Short Self-Test
		◦	SMART Extended Self-Test
System Information	(view only)
	●	Installed Memory
	●	Memory Bank 1
	●	Memory Bank 2
	●	Memory Bank 3

2 Computer Setup (F10) Utility ENWW