Basic Troubleshooting
Keyboard Light Combinations Used by Boot Block ROM
FailSafe Boot Block Mode | Color | LED Activity | State/Message |
Num Lock | Green | On | ROMPaq diskette not |
|
|
| present, is bad, or drive not |
|
|
| ready.* The screen displays |
|
|
| a Boot Block Recovery |
|
|
| message when using an |
|
|
| embedded graphics |
|
|
| controller or a PCI or AGP |
|
|
| graphics controller card. |
|
|
|
|
Caps Lock | Green | On | Enter password.* |
|
|
|
|
Num, Caps, Scroll Lock | Green | Turn on and off 2 | ROM flash failed.* |
|
| times (accompanied |
|
|
| by 1 long and 3 |
|
|
| short beeps) |
|
|
|
|
|
Num, Caps, Scroll Lock | Green | On | Boot Block ROM Flash |
|
|
| successful. Turn power off, |
|
|
| then on to reboot. |
|
|
|
|
Diagnostic lights do not flash on USB keyboards.
*Insert valid ROMPaq diskette in drive A. Turn power switch off, then on to reflash ROM. If ROM flash is successful, all three keyboard LEDs will light up and you will hear a rising tone series of beeps. Remove diskette and turn power off, then on to restart the computer. For more information about flashing the ROM, refer to the Troubleshooting Guide.
Getting Started |