York THGD18 THRU 60 warranty Listed

Page 1

TECHNICAL GUIDE

SPLIT-SYSTEM

HEAT PUMPS

13 SEER – R-410A

MODELS: THGD18 THRU 60

(1.5 THRU 5 NOMINAL TONS, 1 PHASE)

 

ISO 9001

LISTED

Certified Quality

Management System

Due to continuous product improvement, specifications are subject to change without notice.

Visit us on the web at www.york.com

Additional rating information can be found at www.ahridirectory.org

397763-YTG-B-0508

DESCRIPTION

The heat pump condensing unit is the outdoor part of a versa- tile system of heating and air conditioning. It is designed to be custom-matched with one of UPG’s complete line of evapora- tor sections, with each serving a specific function. Matching Air Handlers are available for upflow, downflow, or horizontal applications to provide a complete system. Electric Heaters are available, if required. Add-on coils are available for use with upflow, downflow, or horizontal furnaces and air han- dlers.

WARRANTY

Single Phase Units:

5-year limited parts warranty.

5-year limited compressor warranty.

FEATURES

QUALITY CONDENSER COILS - The coil is constructed of copper tubing and enhanced aluminum fins for increased efficiency and corrosion protection.

PROTECTED COMPRESSOR - The compressor is inter- nally protected against high pressure, temperature, and externally by a factory installed high pressure switch. This is accomplished by the simultaneous operation of high pressure relief valve and a temperature sensor which pro- tects the compressor if undesirable operating conditions occur. A liquid line filter-drier further protects the compres- sor.

DURABLE FINISH - The cabinet is made of pre-painted steel. The pre-treated galvanized steel provides a better paint to steel bond, which resists corrosion and rust creep. Special primer formulas and matted-textured finish insure less fading when exposed to sunlight.

LOWER INSTALLED COST - Installation time and costs are reduced by easy power and control wiring connec- tions. Available in sweat connect models only. The unit contains enough refrigerant for matching indoor coils and 15 feet of interconnecting piping. The small base dimen- sion means less space is required on the ground or roof.

TOP DISCHARGE - The warm air from the top mounted fan is blown up away from the structure and any landscap- ing. This allows compact location on multi-unit applica- tions.

LOW OPERATING SOUND LEVEL - The upward air flow carries the normal operating noise away from the living area. The rigid top panel effectively isolates any motor sound. Isolator mounted compressor and the rippled fins of the condenser coil muffle the normal fan motor and compressor operating sounds.

LOW MAINTENANCE - Long life permanently lubricated motor-bearings need no annual servicing.

EASY SERVICE ACCESS - Fully exposed refrigerant con- nections, and a single panel covering the electrical con- trols make for easy servicing of the unit.

SECURED SERVICE VALVES - Secured re-usable ser- vice valves are provided on both the liquid and vapor sweat connections for ease of evacuating and charging.

U.L. and C.U.L. listed - approved for outdoor application.

Certified in accordance with the Unitary Small Equipment cer- tification program, which is based on ARI Standard 210/240.

FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE

Image 1
Contents Listed Model Physical and Electrical DataFootnotes ProceduresCooling Rated NET MBH Model Unit AIR HandlerSeer EER CFM SensSeer HP with AV / SV / F*FV Variable Speed Cooling Unit Model CFM Range Rated NET MBH SEER1 FurnaceCooling Unit Model Furnace Model MODEL1 Rated Variable SpeedSeer HP with Variable Speed FURNACES2 HC42C MC62C Hspf Unit AIR COIL1 ARI HEATING2 Model HandlerMBH COP STD Seer HP with MA Seer HP with MVHP with AV / SV / F*FV Variable Speed MBH COP STDSeer HP with AHP Unit COIL1 ARI HEATING2 Model Furnace MBH COP STD Seer HP with Variable Speed FURNACES3 Unit Variable COIL1 ARI HEATING2 Speed ModelModel Furnace MBH COP STD Unit Variable COIL1 ARI HEATING2 SpeedFurnace MBH COP STD Accessories Condensing TemperatureEntering AIR FC/MC/PC24 FC/MC/PC30 FC/MC/PC32 FC/MC/PC35 FC/MC/PC32 FC/MC/PC35 FC/MC/PC37 FC/MC/PC43 FC/MC/PC37 FC/MC/PC43 FC/MC/PC48 1200 1400 1600 FC/MC/PC48 FC/MC/PC60 MA20D MC62D MV20D Outdoor Unit Indoor Coil EnteringMBH COP 30.1 31.8 17.4 18.2 42.7 48.7 52.1 Johnson Controls Unitary Products York Drive Norman, OK

THGD18 THRU 60 specifications

The York THGD18 THRU 60 is a prominent addition to the realm of commercial air conditioning systems, designed specifically to provide high efficiency and reliability in various environments. This series offers a range from 18 to 60 tons, making it suitable for diverse applications, including restaurants, retail spaces, and office buildings.

One of the standout features of the York THGD18 THRU 60 is its Variable Speed Technology. This innovative approach allows the system to adjust its cooling performance in response to the surrounding conditions. By optimizing compressor speed, it maintains consistent temperatures while significantly reducing energy consumption. This not only leads to lower utility bills but also minimizes the carbon footprint, making it an ideal choice for environmentally conscious users.

In terms of durability, the THGD series is constructed with robust materials designed to withstand harsh weather conditions. This durability is complemented by the unit's ability to operate quietly, ensuring minimal disruption in noise-sensitive environments. The manufacturer has integrated advanced sound-dampening technology, allowing businesses to maintain a comfortable atmosphere.

The system's easy installation and maintenance further enhance its appeal. The THGD series comes with a user-friendly design that simplifies access to crucial components. This accessibility reduces downtime and maintenance costs, making it a practical option for facility managers.

A key technology embedded within the York THGD18 THRU 60 series is the advanced microprocessor control system. This intelligent feature allows for precise management of the unit's functions, enabling seamless integration with building management systems. The controls also include user-friendly interfaces that facilitate real-time monitoring and adjustments.

Moreover, the unit employs eco-friendly refrigerants that comply with stringent environmental regulations. This forward-thinking approach not only aligns with global sustainability efforts but also ensures compliance with future regulatory requirements.

In summary, the York THGD18 THRU 60 series stands out for its efficient variable speed operation, robust design, user-focused features, and commitment to sustainability. With an impressive range of capacities and highly adaptable technologies, it remains a top choice for businesses seeking reliable and efficient climate control solutions.