HP dc7800 manual Preparing the New Optical Drive, 18Aligning the Release Latch Hardware Upgrades

Page 32

Preparing the New Optical Drive

Before the new optical drive can be used, the release latch must be attached.

1.Peel the backing off the adhesive on the release latch.

2.Without allowing the release latch to touch the optical drive, carefully align the holes on the release latch with the pins on the side of the optical drive. Make sure the release latch is oriented properly.

3.Insert the pin at the front of the optical drive into the hole at the end of the release latch, and press firmly.

4.Insert the second pin, and press the entire release latch firmly to fasten the latch securely to the optical drive.

Figure 2-18Aligning the Release Latch

26 Chapter 2 Hardware Upgrades

ENWW

Image 32

Contents Hardware Reference Guide dc7800 Series Ultra- Slim Desktop Page About This Book Iv About This Book Table of contents Index Product Features Standard Configuration FeaturesDrive configuration may vary by model Front Panel ComponentsRear Panel Components 2Rear Panel ComponentsKeyboard 3Keyboard ComponentsUsing the Windows Logo Key 4Windows Logo Key Functions5Serial Number and Product ID Location Product Features Serial Number LocationChanging from Desktop to Tower Configuration Enww Hardware Upgrades Serviceability FeaturesRemoving the Computer Access Panel Removing and Replacing the Front Bezel 2Lifting the Fan ShroudEnww Removing a Bezel Blank 5Removing a Bezel BlankDDR2-SDRAM SODIMMs Installing Additional MemorySODIMMs Populating Sodimm Sockets 6SODIMM Socket LocationsInstalling SODIMMs Enww Enww Upgrading the Hard Drive 9Unlocking the Hard Drive Carrier11Removing the Hard Drive Guide Screw Hardware Upgrades 13Transferring the Guide Screws Enww Enww Replacing the Optical Drive Removing the Existing Optical Drive17Removing the Optical Drive 18Aligning the Release Latch Hardware Upgrades Preparing the New Optical DriveInstalling the New Optical Drive 20Connecting the Cable and Locking the Drive in PlaceEnww Installing and Removing a Port Cover 22Removing a Port CoverSpecifications Table A-1SpecificationsRated Input Current maximum1 Battery Replacement Type Enww Cable Lock Installing a Security LockSecurity Lock Provisions Padlock HP Business PC Security Lock Enww Grounding Methods Electrostatic DischargePreventing Electrostatic Damage Computer Operating Guidelines and RoutineCare Optical Drive Precautions CleaningSafety Shipping PreparationIndex KeyboardScrews

Related manuals

Manual 102 pages 8.62 Kb