HP dc7600 tower manual Changing from a Desktop to a Minitower Configuration

Page 16

Product Features

10.Remove the bezel subpanel as described in the “Removing Bezel Blanks” section.

ÄCAUTION: Hold the subpanel straight when you pull it away from the front bezel. Pulling the subpanel away at an angle could damage the pins that align it within the front bezel.

11.Reposition the bezel blanks within the subpanel in the proper orientation for the minitower configuration.

12.Reposition the subpanel (rotate it 90°) with the logo at the bottom, then snap it back into the bezel.

Changing from a Desktop to a Minitower Configuration

13.Replace the front bezel and computer access panel.

14.Reconnect the external equipment.

15.If you normally lock the Smart Cover Lock, use Computer Setup to relock the lock and enable the Smart Cover Sensor.

1–12

www.hp.com

Hardware Reference Guide

Image 16

Contents Hardware Reference Guide Hardware Reference Guide Contents Index Product Features Standard Configuration FeaturesFront Panel Components Front Panel ComponentsRear Panel Components Rear Panel ComponentsKeyboard Keyboard ComponentsUsing the Windows Logo Key Special Mouse FunctionsSerial Number Location Changing from a Minitower to a Desktop Configuration Installing a Drive in the Desktop Configuration Changing from a Minitower to a Desktop Configuration Changing from a Desktop to a Minitower Configuration Installing a Drive in the Minitower Configuration Changing from a Desktop to a Minitower Configuration Hardware Upgrades Serviceability FeaturesUsing the Smart Cover FailSafe Key Smart Cover LockRemoving the Smart Cover Lock Screws Removing the Computer Access Panel Replacing the Computer Access Panel Removing the Front Bezel Replacing the Front Bezel Removing Bezel Blanks DIMMs Installing Additional MemoryDDR2-SDRAM DIMMs Populating Dimm Sockets Description Socket Color Installing DIMMs Installing a Dimm Hardware Upgrades Installing or Removing an Expansion Card Opening the Expansion Slot Retainer Removing an Expansion Slot Cover Removing a Standard PCI Expansion Card Removing a PCI Express x16 Expansion Card Installing an Expansion Card Drive Positions Desktop and Minitower Drive PositionsInstalling Additional Drives Hardware Upgrades Installing an Optical or other Removable Storage Device Hardware Upgrades Connecting the Drive Cables Installing a Sata Hard Drive into a 3.5-inch Drive Bay Installing a Hard Drive into the Hard Drive Bay Connect the power cable 1 and data cable 2 to the hard drive Removing a Drive from the Drive Bay Removing an Optical Drive in the Desktop Configuration Hardware Upgrades Store the removed drive in anti-static packaging Specifications HP Compaq Convertible MinitowerHeat Dissipation Battery Replacement Type Removing and Replacing a Coin Cell Battery Type Type Security Lock Provisions Installing a Security LockCable Lock Padlock Universal Chassis Clamp Lock Without Security CableSecurity Lock Provisions With Security Cable Security Lock Provisions Preventing Electrostatic Damage Electrostatic DischargeGrounding Methods Electrostatic Discharge Computer Operating Guidelines and Routine Care Optical Drive Precautions CleaningSafety OperationShipping Preparation Index Index Sata