HP dc7600 tower manual Type

Page 55

Battery Replacement

Type 3

a.Pull back on the clip 1 that is holding the battery in place, and remove the battery 2.

b.Insert the new battery and position the clip back into place.

Removing a Coin Cell Battery (Type 3)

✎After the battery has been replaced, use the following steps to complete this procedure.

5.Replace the computer access panel.

6.Plug in the computer and turn on power to the computer.

7.Reset the date and time, your passwords, and any special system setups, using Computer Setup. Refer to the Computer Setup (F10) Utility Guide on the Documentation and Diagnostics CD.

8.If you normally lock the Smart Cover Lock, use Computer Setup to relock the lock and enable the Smart Cover Sensor.

B–4

www.hp.com

Hardware Reference Guide

Image 55

Contents Hardware Reference Guide Hardware Reference Guide Contents Index Standard Configuration Features Product FeaturesFront Panel Components Front Panel ComponentsRear Panel Components Rear Panel ComponentsKeyboard Components KeyboardSpecial Mouse Functions Using the Windows Logo KeySerial Number Location Changing from a Minitower to a Desktop Configuration Installing a Drive in the Desktop Configuration Changing from a Minitower to a Desktop Configuration Changing from a Desktop to a Minitower Configuration Installing a Drive in the Minitower Configuration Changing from a Desktop to a Minitower Configuration Serviceability Features Hardware UpgradesSmart Cover Lock Using the Smart Cover FailSafe KeyRemoving the Smart Cover Lock Screws Removing the Computer Access Panel Replacing the Computer Access Panel Removing the Front Bezel Replacing the Front Bezel Removing Bezel Blanks DIMMs Installing Additional MemoryDDR2-SDRAM DIMMs Populating Dimm Sockets Description Socket Color Installing DIMMs Installing a Dimm Hardware Upgrades Installing or Removing an Expansion Card Opening the Expansion Slot Retainer Removing an Expansion Slot Cover Removing a Standard PCI Expansion Card Removing a PCI Express x16 Expansion Card Installing an Expansion Card Desktop and Minitower Drive Positions Drive PositionsInstalling Additional Drives Hardware Upgrades Installing an Optical or other Removable Storage Device Hardware Upgrades Connecting the Drive Cables Installing a Sata Hard Drive into a 3.5-inch Drive Bay Installing a Hard Drive into the Hard Drive Bay Connect the power cable 1 and data cable 2 to the hard drive Removing a Drive from the Drive Bay Removing an Optical Drive in the Desktop Configuration Hardware Upgrades Store the removed drive in anti-static packaging HP Compaq Convertible Minitower SpecificationsHeat Dissipation Battery Replacement Type Removing and Replacing a Coin Cell Battery Type Type Security Lock Provisions Installing a Security LockCable Lock Padlock Without Security Cable Universal Chassis Clamp LockSecurity Lock Provisions With Security Cable Security Lock Provisions Preventing Electrostatic Damage Electrostatic DischargeGrounding Methods Electrostatic Discharge Computer Operating Guidelines and Routine Care Operation Optical Drive PrecautionsCleaning SafetyShipping Preparation Index Index Sata