HP 8200 tower manual

Page 17

2.Select or enter the desired RAID Level. Use the information on the bottom half of the screen if necessary.

3.Use the arrow keys to scroll to Create Volume, and press Enter. The following screen appears. WARNING: All data on the selected disk will be deleted.

4.Type Y to continue.

Image 17

Contents Bios Intel Rapid Storage Technology Software installation Introduction Definitions Basics of Ahci and RAID TechnologySata Emulation Mode Bios / Software / Hardware ConsiderationsNew operating system installation Benefits of AhciPkgmgr.exe /oC\C\Windows /nC\AddAHCI\HP-AHCI.xml GTF Support HP 8100 and 8200 Business PCs only Enhancing existing Windows XP images from IDE ModeBasic RAID Types LimitationsHardware RAID 0 with two hard drives StripedPerformance RAID 0 with two hard drives Reliability RAID 1 mirroring RAID 1 with two hard drives MirrorFirst disk Second disk Third disk RAID 5 with three hard drivesIntel Matrix RAID Technology Recommended configurations Configurations Unsupported configurations Other supported configurationsEnabling RAID through F10 System Bios Configuring RAID on non-factory preinstalled configurationsConfiguring RAID Volume using the Option ROM Accessing RAID Option ROMPage Page Intel Rapid Storage Technology software installation RAID Migration to RAID 1 from two non-RAID hard drives RAID migrations using Intel Rapid Storage ConsoleMigration to RAID 0 from three non-RAID hard drives Migration to RAID 0 from two non-RAID hard drivesMigration to RAID 5 from three non-RAID hard drives Page Page Installation Language support Degradation Get connected

Related manuals

Manual 114 pages 31.03 Kb

Manual 13 pages 15.59 Kb