HP 6000 Pro manual Installing DIMMs

Page 23

will have more memory than the other, the larger amount should be assigned to Channel A. For example, if you are populating the sockets with one 1-GB DIMM, and three 512-MB DIMMs, Channel A should be populated with the 1-GB DIMM and one 512-MB DIMM, and Channel B should be populated with the two 512-MB DIMMs. With this configuration, 2-GB will run as dual channel and 512-MB will run as single channel.

●In any mode, the maximum operational speed is determined by the slowest DIMM in the system.

Installing DIMMs

CAUTION: You must disconnect the power cord and wait approximately 30 seconds for the power to drain before adding or removing memory modules. Regardless of the power-on state, voltage is always supplied to the memory modules as long as the computer is plugged into an active AC outlet. Adding or removing memory modules while voltage is present may cause irreparable damage to the memory modules or system board. If you see an LED light on the system board, voltage is still present.

The memory module sockets have gold-plated metal contacts. When upgrading the memory, it is important to use memory modules with gold-plated metal contacts to prevent corrosion and/or oxidation resulting from having incompatible metals in contact with each other.

Static electricity can damage the electronic components of the computer or optional cards. Before beginning these procedures, ensure that you are discharged of static electricity by briefly touching a grounded metal object. For more information, refer to Appendix D, Electrostatic Discharge

on page 57.

When handling a memory module, be careful not to touch any of the contacts. Doing so may damage the module.

1.Remove/disengage any security devices that prohibit opening the computer.

2.Remove all removable media, such as compact discs or USB flash drives, from the computer.

3.Turn off the computer properly through the operating system, then turn off any external devices.

4.Disconnect the power cord from the power outlet and disconnect any external devices.

CAUTION: You must disconnect the power cord and wait approximately 30 seconds for the power to drain before adding or removing memory modules. Regardless of the power-on state, voltage is always supplied to the memory modules as long as the computer is plugged into an active AC outlet. Adding or removing memory modules while voltage is present may cause irreparable damage to the memory modules or system board. If you see an LED light on the system board, voltage is still present.

5.If the computer is on a stand, remove the computer from the stand.

6.Remove the access panel.

WARNING! To reduce risk of personal injury from hot surfaces, allow the internal system components to cool before touching.

ENWW

Installing Additional Memory 17

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Hardware Reference Guide Hardware Reference Guide About This Book Iv About This Book Table of contents Appendix D Electrostatic Discharge Standard Configuration Features Product Features1Front Panel Components Front Panel Components2Media Card Reader Components Media Card Reader Components3Rear Panel Components Rear Panel Components4Keyboard Components Keyboard5Windows Logo Key Functions Using the Windows Logo Key6Serial Number and Product ID Location Serial Number LocationServiceability Features Hardware UpgradesRemoving the Computer Access Panel 2Replacing the Access Panel Hardware Upgrades Replacing the Computer Access PanelRemoving the Front Bezel Removing Bezel Blanks 4Removing a Bezel Blank Hardware Upgrades5Replacing the Front Bezel Replacing the Front BezelUsing the Small Form Factor Computer in a Tower Orientation DDR3-SDRAM DIMMs Installing Additional MemoryDIMMs 1DIMM Socket Locations Populating Dimm SocketsInstalling DIMMs 8Rotating the Drive Cage Up Hardware Upgrades Enww 2Expansion Slot Locations Removing or Installing an Expansion Card12Removing an Expansion Slot Cover 13Removing a Standard PCI Expansion Card Hardware Upgrades Enww Enww Enww 3Drive Positions Drive Positions18Extra Guide Screw Locations Installing and Removing DrivesEnww 4System Board Drive Connections System Board Drive ConnectionsRemoving an External 5.25-inch Drive Enww 23Removing the 5.25-inch Drive Installing an Optical Drive into the 5.25-inch Drive Bay25Installing the Optical Drive Enww Removing an External 3.5-inch Drive 29Disconnecting the Media Card Reader USB Cable Installing a Drive into the 3.5-inch External Drive Bay Enww Enww Enww 37Installing Hard Drive Guide Screws Enww 40Removing the Thermal Sensor Removing and Replacing a Removable 3.5-inch Sata Hard DriveEnww Enww Enww Table A-1Specifications SpecificationsAppendix a Specifications Battery Replacement Type Enww Cable Lock Installing a Security LockExternal Security Devices HP Business PC Security Lock PadlockEnww Figure C-6Engaging the Lock Front Bezel SecurityEnww Grounding Methods Electrostatic DischargePreventing Electrostatic Damage Computer Operating Guidelines and Routine Care Shipping Preparation Optical Drive PrecautionsCleaning SafetyVGA IndexEnww
Related manuals
Manual 125 pages 37.11 Kb Manual 3 pages 56.06 Kb Manual 4 pages 42.88 Kb Manual 4 pages 45.79 Kb

6000 Pro specifications

The HP Pro 6000 series desktops are engineered to deliver an impressive blend of performance, reliability, and efficient power management, making them a solid choice for businesses and professionals. This series is designed to cater to a variety of computing needs, from everyday tasks to more demanding applications.

One of the key features of the HP Pro 6000 is its versatility in configuration options. Users can choose from a range of processors, including Intel's powerful Core i5 and i7 options, which ensure fast and responsive performance for multi-tasking and resource-intensive applications. The desktops are equipped with various memory options, supporting up to 32 GB of DDR3 RAM, which enhances the ability to run multiple applications simultaneously without compromising speed.

Storage options in the Pro 6000 series are diverse, with traditional hard disk drives (HDD) offering substantial space for data storage, and solid-state drives (SSD) providing ultra-fast access times and reliability. This combination caters to different user needs, ensuring that both large storage capacities and speedy performance are available.

A notable characteristic of the HP Pro 6000 series is its design. The chassis is constructed with a focus on space-saving while still allowing for upgrades and expansions. It features multiple USB ports, including USB 3.0 for quicker data transfer, as well as options for legacy ports such as serial and parallel for compatibility with older devices. The series also supports various display outputs, including HDMI and VGA, allowing for connection to a range of monitors and projectors.

In terms of energy efficiency, the HP Pro 6000 is designed with sustainability in mind. It is Energy Star certified, meaning it meets strict energy efficiency guidelines, helping to reduce costs and environmental impact for businesses. Additionally, the system is built with advanced security features such as HP BIOS Protection and optional TPM (Trusted Platform Module) to safeguard sensitive data against unauthorized access.

Another critical feature is the connectivity options that the Pro 6000 offers. It includes integrated Ethernet for wired connections and optional Wi-Fi for wireless networking, ensuring that users can stay connected in various environments. Coupled with robust audio and video capabilities, the Pro 6000 series is well-suited for remote collaboration and multimedia tasks.

Overall, the HP Pro 6000 series desktops merge performance, adaptability, and security, making them an excellent investment for businesses looking to enhance productivity and efficiency while maintaining a focus on sustainability. Whether for small offices or larger enterprises, the Pro 6000 series provides a reliable and versatile computing solution that meets the demands of the modern workplace.
Top Page Image Contents