HP 6000 Pro manual Installing and Removing Drives, 18Extra Guide Screw Locations

Page 33

Installing and Removing Drives

When installing additional drives, follow these guidelines:

●The primary Serial ATA (SATA) hard drive must be connected to the dark blue primary SATA connector on the system board labeled SATA0.

●Connect a SATA optical drive to the white SATA connector on the system board labeled SATA1.

●Connect devices in order of SATA0, SATA1, SATA2, then SATA3

●Connect an eSATA adapter cable to the orange SATA3 connector.

NOTE: The eSATA adapter installs into one of the expansion slots on the rear of the computer. You must configure the SATA3 connector to function as eSATA in the Computer Setup utility. Select Storage > Storage Options > eSATA Port to reconfigure the SATA3 connector. Refer to the Computer Setup (F10) Utility Guide for more information.

●Connect a media card reader USB cable to the USB connector on the system board labeled MEDIA. If the media card reader has a 1394 port, connect the 1394 cable to the 1394 PCI card.

●The system does not support Parallel ATA (PATA) optical drives or PATA hard drives.

●You must install guide screws to ensure the drive will line up correctly in the drive cage and lock in place. HP has provided extra guide screws for the external drive bays (five 6-32 standard screws and four M3 metric screws), installed in the front of the chassis, under the front bezel. The 6-32 standard screws are required for a secondary hard drive. All other drives (except the primary hard drive) use M3 metric screws. The HP-supplied metric screws are black and the HP-supplied standard screws are silver. If you are replacing the primary hard drive, you must remove the four silver and blue 6-32 isolation mounting guide screws from the old hard drive and install them in the new hard drive.

Figure 2-18Extra Guide Screw Locations

No.

Guide Screw

Device

 

 

 

1

Black M3 Metric Screws

All Other Drives (except primary hard drive)

 

 

 

2

Silver 6-32 Standard Screws

Secondary Hard Drive

There are at total of five extra silver 6-32 standard screws. Four are used as guide screws for a secondary hard drive. The fifth is used for bezel security (see Front Bezel Security on page 55 for more information).

ENWW

Installing and Removing Drives 27

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Hardware Reference Guide Hardware Reference Guide About This Book Iv About This Book Table of contents Appendix D Electrostatic Discharge Standard Configuration Features Product Features1Front Panel Components Front Panel Components2Media Card Reader Components Media Card Reader Components3Rear Panel Components Rear Panel Components4Keyboard Components Keyboard5Windows Logo Key Functions Using the Windows Logo Key6Serial Number and Product ID Location Serial Number LocationServiceability Features Hardware UpgradesRemoving the Computer Access Panel 2Replacing the Access Panel Hardware Upgrades Replacing the Computer Access PanelRemoving the Front Bezel Removing Bezel Blanks 4Removing a Bezel Blank Hardware Upgrades5Replacing the Front Bezel Replacing the Front BezelUsing the Small Form Factor Computer in a Tower Orientation Installing Additional Memory DIMMsDDR3-SDRAM DIMMs 1DIMM Socket Locations Populating Dimm SocketsInstalling DIMMs 8Rotating the Drive Cage Up Hardware Upgrades Enww 2Expansion Slot Locations Removing or Installing an Expansion Card12Removing an Expansion Slot Cover 13Removing a Standard PCI Expansion Card Hardware Upgrades Enww Enww Enww 3Drive Positions Drive Positions18Extra Guide Screw Locations Installing and Removing DrivesEnww 4System Board Drive Connections System Board Drive ConnectionsRemoving an External 5.25-inch Drive Enww 23Removing the 5.25-inch Drive Installing an Optical Drive into the 5.25-inch Drive Bay25Installing the Optical Drive Enww Removing an External 3.5-inch Drive 29Disconnecting the Media Card Reader USB Cable Installing a Drive into the 3.5-inch External Drive Bay Enww Enww Enww 37Installing Hard Drive Guide Screws Enww 40Removing the Thermal Sensor Removing and Replacing a Removable 3.5-inch Sata Hard DriveEnww Enww Enww Table A-1Specifications SpecificationsAppendix a Specifications Battery Replacement Type Enww Installing a Security Lock External Security DevicesCable Lock HP Business PC Security Lock PadlockEnww Figure C-6Engaging the Lock Front Bezel SecurityEnww Electrostatic Discharge Preventing Electrostatic DamageGrounding Methods Computer Operating Guidelines and Routine Care Cleaning Optical Drive PrecautionsSafety Shipping PreparationVGA IndexEnww
Related manuals
Manual 125 pages 37.11 Kb Manual 3 pages 56.06 Kb Manual 4 pages 42.88 Kb Manual 4 pages 45.79 Kb

6000 Pro specifications

The HP Pro 6000 series desktops are engineered to deliver an impressive blend of performance, reliability, and efficient power management, making them a solid choice for businesses and professionals. This series is designed to cater to a variety of computing needs, from everyday tasks to more demanding applications.

One of the key features of the HP Pro 6000 is its versatility in configuration options. Users can choose from a range of processors, including Intel's powerful Core i5 and i7 options, which ensure fast and responsive performance for multi-tasking and resource-intensive applications. The desktops are equipped with various memory options, supporting up to 32 GB of DDR3 RAM, which enhances the ability to run multiple applications simultaneously without compromising speed.

Storage options in the Pro 6000 series are diverse, with traditional hard disk drives (HDD) offering substantial space for data storage, and solid-state drives (SSD) providing ultra-fast access times and reliability. This combination caters to different user needs, ensuring that both large storage capacities and speedy performance are available.

A notable characteristic of the HP Pro 6000 series is its design. The chassis is constructed with a focus on space-saving while still allowing for upgrades and expansions. It features multiple USB ports, including USB 3.0 for quicker data transfer, as well as options for legacy ports such as serial and parallel for compatibility with older devices. The series also supports various display outputs, including HDMI and VGA, allowing for connection to a range of monitors and projectors.

In terms of energy efficiency, the HP Pro 6000 is designed with sustainability in mind. It is Energy Star certified, meaning it meets strict energy efficiency guidelines, helping to reduce costs and environmental impact for businesses. Additionally, the system is built with advanced security features such as HP BIOS Protection and optional TPM (Trusted Platform Module) to safeguard sensitive data against unauthorized access.

Another critical feature is the connectivity options that the Pro 6000 offers. It includes integrated Ethernet for wired connections and optional Wi-Fi for wireless networking, ensuring that users can stay connected in various environments. Coupled with robust audio and video capabilities, the Pro 6000 series is well-suited for remote collaboration and multimedia tasks.

Overall, the HP Pro 6000 series desktops merge performance, adaptability, and security, making them an excellent investment for businesses looking to enhance productivity and efficiency while maintaining a focus on sustainability. Whether for small offices or larger enterprises, the Pro 6000 series provides a reliable and versatile computing solution that meets the demands of the modern workplace.
Top Page Image Contents