HP Converged Network Adapters (CNA) manual Power and environmental specifications

Page 13

Compliance	Standard
	IPv4/IPv6 TCP, UDP checksum Offload
	IPv4/IPv6 TCP, Large Send Offload
	IPv4/IPv6 TCP, Large Receive Offload
	Jumbo Frames up to 9000 Bytes

Power and environmental specifications
Table 5 Power and environmental specifications
Power and environmental specifications	Value
Operating	Temperature		0° to 55° C (32° to 131° F)
	Humidity	15 to 80% relative humidity (RH), non-condensing
Non-operating	Temperature		-40° to 70° C (-40° to 158° F)
	Humidity	10 to 90% relative humidity (RH), non-condensing
Power	9.4 Watts typical, 10.5 Watts maximum

Power and environmental specifications 13

Image 13

Contents Abstract Page Contents AT118A LED Indicators LED indicatorsIntroduction OverviewNetwork management PXE LAN bootManagement support Server integrationInstalling an adapter in a server Installing an adapterPreventing electrostatic discharge Connecting other devices Installing a low profile bracketConnecting the network cable HP-UX operating system Installing the HP-UX operating system componentsPrerequisites Update the adapter firmware Important Ethernet patches and updatesInstalling driver software Installing the driver from CD-ROMVerify the Ethernet adapter installation Installing OnlineDiagProceed to Installing OnlineDiag Alternate website for downloading files Verify Ethernet connectivityCable specifications SpecificationsGeneral specifications CompliancePower and environmental specifications Power and environmental specificationsRegulatory compliance notices Class a equipment European Union noticeJapanese notice Bsmi noticeKorean notices Electrostatic Discharge Electrostatic DischargeGrounding Methods HP contact information HP Contact informationDocsfeedback@hp.com Acronyms and abbreviations Acronyms and abbreviations10GbE PCI ExpressIndex Symbols

Power and environmental specifications