Audio Function by Direct Key

To execute Auto Setup by direct key:

1Press the ‘—’ button with no OSD “Main Menu” displayed, to start the execution of Auto Setup.

The image will change color and appear to jitter during the Auto Setup function. After the function is complete, you are asked whether the image appears correct or not.

2If the image looks correct, choose Yes, and then the OSD will close automatically.

If the image requires further adjustment, choose No, and the ‘Phase’ bar will show. Then you can adjust Phase by using the ‘+’ or ‘—’ buttons. When all text appears focused and there is no instability in the image, press the ‘Select’ button to end the adjustment and close the OSD menu.

Audio Function by Direct Key

To perform the audio function by direct key:

1Press the ‘+’ button with no OSD “Main Menu” displayed to show the “Audio function” menu. There are two items for your selection.

2Use the ‘+’ or ‘—’ button to move (forward or backward) to the function icon and highlight it, and then press ‘Select’ to select it.

If ‘Audio Mute’ is selected, you may use the ‘+’ or ‘—’ buttons to activate or deactivate mute function.

If ‘Volume’ is selected, you may use the ‘+’ or ‘—’ buttons to adjust the setting of volume of the speaker. The fullness of the graphic bar as well as the numerical value at the right corner is changed accordingly.

16user’s guide