HP VF52 manual Adjusting the Management Submenu

3Press the ‘Select’ button to select and execute the Auto Setup function. After the execution of the Auto Setup function, it will show the follow message:

If the image looks correct, choose Yes.

Or

If the image requires further adjustment, choose No, and the ‘Phase’ bar will show. Then you can adjust Phase by using the ‘+’ or ‘—’ buttons. When all text appears focused and there is no instability in the image, press the ‘Select’ button to end the adjustment.

Adjusting the “Management” Submenu

To perform the adjustment in the “Management” submenu you should follow the steps below:

1Press the ‘Select’ button to show the OSD “Main Menu”.

2Use the ‘+’ or ‘—’ button to move (forward or backward) to the management icon and highlight it.

3Press the ‘Select’ button to enter the “Management” Submenu. It will show four items for your further adjustment.

If ‘Brightness’ is selected, you may use the ‘+’ or

‘—’ buttons to adjust the setting of brightness. The fullness of the graphic bar as well as the numerical value at the right corner is changed accordingly.

10user’s guide