HP LP2275w manual 3 OSD Menu continued, Icon, Main Menu, Submenu, Description

Table 4-3OSD Menu (continued)

Icon	Main Menu	Submenu	Description
			The factory default is Automatic Input Scan
		Input Switch Mode	NOTE: The Default Video Input must be set to Auto-Detect to
			activate functionality of the Input Switch Mode.
			Controls the monitor action when the current video input is
			removed or enters the power savings mode. Set to:
			● Input Auto-Switching OFF—the monitor takes no action
			when the displayed input is removed or enters the power
			savings mode
			● Input Auto-Switching ON—the monitor automatically seeks
			and displays an active input when the currently displayed
			video input is removed or enters the power mode
			The factory default is Off.
		PIP/POP Select	Selects the type of secondary window. The choices are:
			● PIP - Picture In Picture—secondary window is displayed as
			a small window within the primary window
			● POP - Picture Outside Picture—secondary window is
			displayed side by side with the primary window
		PIP/POP Source	Selects the input source for the PIP/POP window. The choices
			are Composite Video, S-Video, and Component Video.
			NOTE: All inputs are supported for the main window. however
			only Composite, S-Video, and Component inputs are supported
			for the secondary window.
		PIP Size	Selects the size of the PIP window. The choices are Small,
			Medium, and Large.
		PIP Position	Selects the position of the PIP window on the screen. The choices
			are Top Left, Top Right, Bottom Right, and Bottom Left.
	Information		Selects and displays important information about the monitor.
		Current Settings	Provides the current input video mode.
		Recommended Settings	Provides the recommended resolution mode and refresh rate for
			the monitor.
		Serial Number	Reports the serial number of the monitor. The serial number is
			needed if contacting HP technical support.
		Version	Reports the firmware version of the monitor.
		Backlight Hours	Reports the total hours of backlight operation.
	Factory Reset		Returns all OSD menu settings and DDC/CI controls to the factory
			default settings, except the Language.
	Exit		Exits the OSD menu screen.

Adjusting the Monitor Settings 29