HP Performance ZR2440w 24 XW477A8#ABA manual Using the On-Screen Display Menu Select Models

Page 37

Pressing the Power button, , puts the monitor in low power mode. (To turn power off completely, use

the switch on the rear of the panel.) The monitor also enters low-power mode when there is no video signal input.

When the monitor is first powered on, the LED turns blue and remains blue for about half a minute. It then turns off. If the monitor receives a signal outside its range (e.g., too high a frequency), the LED flashes blue continuously.

This model does not use an OSD or on-screen messages.

Using the On-Screen Display Menu (Select Models)

The On-Screen Display (OSD) menu gives you choices for operating your monitor. Not all menu options below are available on all models. For example, monitors with no analog input do not show menus specific to analog images. The ZR2740w does not use an OSD. Models that use an OSD have a menu

() button on the front.

NOTE: If there is a problem with the display settings, try resetting the settings to the factory defaults by opening the OSD and selecting Factory Reset from the OSD menu.

To access the OSD, do the following:

1.If the monitor is not already on, press the Power button to turn on the monitor.

2.Press the Menu button on the monitor's front panel. You will see a menu of options and submenus.

3.To navigate through the menu, press the + (Plus) button on the monitor's front panel to scroll up, or the — (Minus) button to scroll down.

4.To select an item from the OSD Menu, use the + or — buttons to scroll to and highlight your selection, then press the OK button to select that function.

5.Adjust the item using the + or — buttons on the front panel to adjust the scale.

6.After adjusting the function, select Save and Return, or Cancel if you don't want to save the setting, then select Exit from the Main Menu. The Save and Return option is only active if you change a menu item.

NOTE: If the buttons remain untouched for 30 seconds (factory default) while displaying a menu, the firmware will save the current adjustments and exit. Also, if the video controller changes video mode while the OSD is active, the current (adjusted) settings will not be saved, the OSD will be turned off, and the new mode will be displayed.

OSD Menu Selections

Below are the submenus of the OSD and their options. Not all models will display all submenus. For example, a monitor with no DCR (dynamic contrast ratio) will not display the DCR option. In addition, the wording of some options might vary slightly from the wording here, depending on model. These variations are not great enough to cause confusion about which option is which.

ENWW

Overview of Operation 29

Page 36 Page 38
Image 37
Page 36 Page 38
Contents HP ZR2040w, ZR2240w, ZR2440w and ZR2740w LCD Monitors First Edition September Document Part Number About This Guide About This Guide Table of contents Appendix a Troubleshooting Appendix D LCD Monitor Quality and Pixel Policy Viii ZR2040w Model Product FeaturesZR2440w Model ZR2240w ModelZR2740w Model Important Safety Information Safety and Maintenance GuidelinesMaintenance Guidelines Shipping the Monitor Cleaning the MonitorInstalling the Pedestal Setting Up the MonitorZR2040w Model Rear Components4ZR2240w Rear Components ZR2240w Model5ZR2440w Rear Components ZR2440w ModelEnww 6ZR2740w Rear Components ZR2740w ModelRouting and Connecting the Cables Routing and Connecting the Cables ZR2240w, ZR2440w, and ZR2740w Models 10Cable Routing Setting Up the MonitorMounting the Monitor to User-Supplied Support Hardware Mounting the ZR2040w Panel Mounting a Quick-Release Panel Enww Locating the Information Card Select Models Turning on the Monitor Installing a Cable LockInstalling the .INF and .ICM Files Installing Software and UtilitiesInformation File Image Color Matching FileInstalling from the CD Adjusting the MonitorAdjusting the Monitor Portrait Orientation Overview of Operation Operating the MonitorZR2040w and ZR2240w Model 1ZR2040w and ZR2240w Front Panel Controls ZR2440w Model Source OSD Menu Selections Using the On-Screen Display Menu Select ModelsOSD Menu OSD Menu Monitor is powered on. Select the location to DVI-D, HDMI, VGA DVI-D Screen Messages Using the HP Display Assistant Utility Adjusting the Monitor SettingsUsing the Auto-Adjustment Function Entering User ModesOptimizing Image Performance Manually 6Adjusting the Image Position Sleep Timer ModeEnww Solving Common Problems TroubleshootingOnline Technical Support Preparing to Call Technical Support TFT LCD Technical SpecificationsTable B-1ZR2240w Specifications ZR2440w Model ZR2740w Model ZR2040w Model Preset Modes Preset Display ResolutionsTable B-2 ZR2240w Model Preset ModesTable B-4ZR2440w High Definition Video Formats ZR2440w Model Preset ModesZR2740w Model Preset Modes Energy Saver FeatureFederal Communications Commission Notice Agency Regulatory NoticesModifications CablesAvis Canadien Canadian NoticeEuropean Union Regulatory Notice German Ergonomics Notice Japanese Notice Korean Notice Power Cord Set RequirementsProduct Environmental Notices Japanese Power Cord RequirementsEnergy Star Qualification Enww Ukraine Restriction of Hazardous Substances Turkey EEE RegulationLCD Monitor Quality and Pixel Policy

27 XW476A4#ABA, Performance ZR2440w 24 XW477A8#ABA specifications

The HP Performance ZR2440w is a high-end 24-inch display designed for professionals in need of precise and vivid visuals. This monitor, identified by the model number XW477A8#ABA, delivers exceptional image quality and color accuracy, making it a perfect choice for graphic designers, photographers, and video editors.

One of the standout features of the ZR2440w is its IPS (In-Plane Switching) panel technology. This provides wide viewing angles of up to 178 degrees both horizontally and vertically, ensuring consistent colors and brightness from virtually any angle. The display offers a resolution of 1920 x 1200 pixels, which enhances clarity and detail, allowing users to work with intricate designs and high-resolution images effortlessly.

Color accuracy is another hallmark of the HP ZR2440w. With a factory-calibrated color gamut that covers 99% of the sRGB spectrum, this monitor ensures that colors are true to life. It also supports 10-bit color processing, further enhancing the depth and richness of the colors displayed. Coupled with a brightness level of 300 nits, the ZR2440w delivers vivid images that bring creative projects to life.

In terms of connectivity, the ZR2440w is equipped with various ports, including DisplayPort and DVI-D, providing flexibility for different setups. An integrated USB hub with multiple USB 2.0 ports is also included, making it easy to connect peripherals and accessories directly to the monitor.

The ergonomic design of the ZR2440w allows for height, tilt, and swivel adjustments, enabling users to customize the viewing position for maximum comfort during extended use. This represents a significant advantage for professionals who spend long hours in front of their monitors, as it helps to minimize strain and fatigue.

Another impressive model in the HP lineup is the ZR2740w (model number XW476A4#ABA), a 27-inch professional display that shares many of the features of the ZR2440w but offers even larger screen real estate. Like its smaller counterpart, the ZR2740w features an IPS panel for wide viewing angles and exceptional color reproduction. With a resolution of 2560 x 1440 pixels, the ZR2740w provides even greater detail and is ideal for tasks requiring high-resolution imagery.

In conclusion, both the HP Performance ZR2440w and ZR2740w monitors stand out in the field of professional displays. They combine advanced technologies, exceptional color accuracy, and ergonomic designs to meet the demanding needs of creative professionals. Investing in either of these monitors ensures an enhanced visual experience, empowering users to deliver outstanding results in their projects.
Top Page Image Contents