HP 23.6' C5U90AA#ABA manual Characters only applicable to VGA

		characters (only applicable to VGA
		input)
		To adjust the horizontal position of
	Horizontal position	an image (only applicable to VGA
		input).
		To adjust the vertical position of an
	Vertical position	image (only applicable to VGA
		input).
		Selects the method on how
		displayed information on the
		monitor will be formatted.Select
		Fill to Screen – image fills the entire
		screen and may look distorted or
	Custom Scaling	elongated because of
		non-proportional scaling of height
		and width.
		Fill to Aspect Ration – image is
		sized to fit the screen and maintains
		proportional image.
	Sharppness	Adjusts the screen imageto look
		sharper or soft.
	Dynamic Contrast	Turns Dynamic Contrast Ratio On
		or Off.The factory default is Off.
OSD Control		Provides a menu for adjusting the
		on-screen display(OSD)control.
	OSD position	To adjust OSD position for your
		monitor.
		To adjust the visual position of the
	Horizontal OSD	OSD menu to the right or left of the
		screen. The factory default
	Position
		horizontal position value is 97.
		To adjust the visual position of the
	Vertical OSD	OSD menu up or down the screen.
		The factory default vertical position
	Position
		value is 13.
		To adjust the transparency to
	OSD Transparency	enable transparent background
		information under the OSD.
		To set the OSD display time (in
	OSD Timeout	seconds) after the last pressing the
		button. The factory default setting is

9