HP LP2065 20', LP2465 manual DVI-I#1

Table 4-2OSD Menu (continued)

Icon	Main Menu	Submenu	Description
	OSD Control		Adjusts the position of the OSD menu on the screen.
		Horizontal Position	Changes the viewing position of the OSD menu to the left or right
			area of the screen. The factory default range is 50.
		Vertical Position	Changes the viewing position of the OSD menu to the top or
			bottom area of the screen. The factory default range is 50.
		OSD Timeout	Sets the time duration in seconds that the OSD is visible after the
			last button is pressed. The factory default is 30 seconds.
		OSD Transparency	Adjust to view the background information through the OSD.
	Information		Selects and displays important information about the monitor.
		Current Settings	Provides the current input video mode.
		Recommended Settings	Provides the recommended resolution mode and refresh rate for
			the monitor.
		Serial Number	Reports the serial number of the monitor. The serial number is
			needed if contacting HP technical support.
		Version	Reports the firmware version of the monitor.
		Backlight hours	Reports the total hours of backlight operation.
	Video Input		Selects the default or primary video input signal when the monitor
	Control		is connected to two active and valid video sources. The monitor
			will automatically determine the video format. The default input
			selection is DVI.
		DVI-I#1	Selects DVI-I 1 input. This input accepts either analog or digital
			signals.
		DVI–I#2	Selects DVI-I 2 input. This input accepts either analog or digital
			signals.
		Disable Input Auto-	Keeps the monitor's video input selection at it's current setting.
		Switching	This menu selection is visible if the video input control is set to
			Enable Input Auto-switching.
		Enable Input Auto-	Automatically returns the monitor's video input to the default auto-
		Switching	switching mode. This menu selection is visible if the video input
			control is set to Disable Input Auto-switching.
	Factory Reset		Returns all OSD menu settings and Power-On Status Display (for
			LP2465 model) settings to the factory default setting, except the
			Language and Power-On Status Display (for LP1965 and LP2065
			models) settings.
	Exit		Exits the OSD menu screen.

24 Chapter 4 Operating the Monitor ENWW