HP LE2002X manual Entering User Modes, Energy Saver Feature, LE2202x Model, 6Factory Preset Modes

Table 4-5Factory Preset Modes (continued)

2	720 × 400		31.469	70.087
3	800 × 600		37.879	60.317
4	1024	× 768	48.363	60.004
5	1280	× 720	45.00	59.94
6	1280	× 1024	63.981	60.02
7	1440	× 900	55.935	59.887
8	1600	× 900	55.935	59.887

LE2202x Model

Table 4-6Factory Preset Modes

Preset	Pixel Format		Horz Freq (kHz)	Vert Freq (Hz)
1	640 × 480		31.469	59.940
2	720 × 400		31.469	70.087
3	800 × 600		37.879	60.317
4	1024	× 768	48.363	60.004
5	1280	× 720	45.00	60.00
6	1280	× 1024	63.981	60.02
7	1440	× 900	55.94	59.89
8	1680	× 1050	65.29	60.0
9	1920	× 1080	67.5	60.00

Entering User Modes

The video controller signal may occasionally call for a mode that is not preset if:

●You are not using a standard graphics adapter.

●You are not using a preset mode.

It this occurs, you may need to readjust the parameters of the monitor screen by using the on-screen display. Your changes can be made to any or all of these modes and saved in memory. The monitor automatically stores the new setting, then recognizes the new mode just as it does a preset mode. In addition to the factory preset modes, there are at least 10 user modes that can be entered and stored.

Energy Saver Feature

The monitors support a reduced power state. The reduced power state will be entered into if the monitor detects the absence of either the horizontal sync signal and/or the vertical sync signal. Upon detecting the absence of these signals, the monitor screen is blanked, the backlight is turned off, and the power light is turned amber. When the monitor is in the reduced power state, the monitor will

14 Chapter 4 Technical Specifications ENWW