HP Display LiteSaver

HP Display LiteSaver is a software application, available on the CD, that increases monitor life and saves energy. It allows you to place the monitor into its low power sleep mode at predefined times by shutting down or reducing power to most internal circuits. This helps protect the LCD panel against image retention. Image retention can occur when the monitor is left on while displaying the same image for an extended period of time, leaving a shadow of the image on the screen.

Installing the HP Display LiteSaver Software

1.Insert the CD in the computer CD-ROM Drive. The CD menu is displayed.

2.Select Install HP Display LiteSaver Software.

3.After installing the software, click the HP Display LiteSaver icon in the Windows system tray or right-click the icon and select Configure from the pop-up menu.

4.Select the following options to configure the HP Display LiteSaver features:

Table 4-3HP Display LiteSaver Configuration Options

Select This Option	To Do This

Enable Display LiteSaver	Enables the HP Display LiteSaver functions; deselect to disable the HP Display
	LiteSaver.

Display Off	Sets the time when the monitor automatically turns off. This does not affect screen
	saver operation, which has priority over the HP Display LiteSaver.

Display On	Sets the time when the monitor automatically turns on. This does not affect screen
	saver operation, which has priority over the HP Display LiteSaver.

Activity Extension	Sets the time in minutes before the monitor turns off if there is any keyboard or mouse
	activity after the Display Off time is reached. If the keyboard or mouse is used, then
	HP Display LiteSaver waits until the set amount of time before turning the display
	off again. Set to 0 to disable. If disabled, the monitor will turn off as soon as the
	Display Off time is reached, regardless of keyboard or mouse activity.

Show 1 minute Display Off Notice	Displays a popup message in the system tray 1 minute before the monitor is turned
	off by HP Display LiteSaver.

Status	Shows the time until the monitor is next due to be turned off by HP Display LiteSaver.

OK	Stores the current settings and minimizes HP Display LiteSaver to the System Tray.

Cancel	Restores the previous settings and minimizes HP Display LiteSaver to the System
	Tray. HP Display LiteSaver will continue to run.

Help	Opens the online help file.

Exit	Exits and closes the HP Display LiteSaver. It will no longer control the monitor power
	until it is next run.

View HP Display LiteSaver Readme on the CD for additional information on how to configure HP Display LiteSaver.

ENWW	HP Display LiteSaver 23