HP LE1911I, L1910I manual Entering User Modes, Energy Saver Feature, LE1911i Model

Table B-5Factory Preset Modes (continued)

10	1024	× 768	56.5	70.0
11	1024	× 768	60.0	75.0
12	1152	× 870	68.7	75.0
13	1152	× 900	71.7	76.0
14	1280	× 1024	64.0	60.0
15	1280	× 1024	80.0	75.0

LE1911i Model

Table B-6Factory Preset Modes

Preset	Pixel Format		Horz Freq (kHz)	Vert Freq (Hz)
1	640 × 480		31.469	59.940
2	720 × 400		31.469	70.087
3	800 × 600		37.879	60.317
4	1024	× 768	48.363	60.004
5	1280	× 960	60.00	60.00
6	1280	× 1024	63.98	60.02

Entering User Modes

The video controller signal may occasionally call for a mode that is not preset if:

●You are not using a standard graphics adapter.

●You are not using a preset mode.

It this occurs, you may need to readjust the parameters of the monitor screen by using the on-screen display or HP Display Assistant software. Your changes can be made to any or all of these modes and saved in memory. The monitor automatically stores the new setting, then recognizes the new mode just as it does a preset mode. In addition to the 15 factory present modes, there are four user modes that can be entered and stored.

Energy Saver Feature

When the monitor is in its normal operating mode, the monitor uses less than 25 watts (LE1901wi) or 40 watts (L1910i) or 28 watts (LE1911i) of power and the Power light is green.

The monitor also supports a reduced power state. The reduced power state will be entered into if the monitor detects the absence of either the horizontal sync signal and/or the vertical sync signal. Upon detecting the absence of these signals, the monitor screen is blanked, the backlight is turned off, and the power light is turned amber. When the monitor is in the reduced power state, the monitor will utilize less than 1 watt of power. There is a brief warm up period before the monitor will return to its normal operating mode.

ENWW Entering User Modes 39