HP L1910I, LE1911I manual Enww

3.Use the four screws provided to install the computer mounting bracket on the Thin Client computer.

NOTE: There are two sets of screw holes on the computer mounting bracket. Use the four holes that are centered on the bracket to install the Thin Client.

Be sure to install the computer mounting bracket on the Thin Client so that the rear ports on the Thin Client are facing down and the feet on the Thin Client are facing outwards.

Figure 3-13Installing the Computer Mounting Bracket on the Thin Client

4.Slide the computer mounting bracket/Thin Client computer onto the stand (1) and reinstall the two screws on top of the bracket (2).

Figure 3-14Sliding the Thin Client onto the Stand

12 Chapter 3 Setting Up the Monitor ENWW