HP 2710, 2010, 2310, 2210, 1910, 2510 manual High-Bandwidth Digital Content Protection Hdcp

2.To connect the DVI-D cable (provided with select models)

Connect one end of the DVI-D video cable to the back of the monitor and the other end to the DVI-D video connector on the computer. You can use this cable only if your computer has a DVI compliant graphics card that is either integrated or installed. The monitor DVI-D connector and cable are included.

Figure 3-8Connecting the VGA or a DVI-D cable - connector locations may vary

NOTE: When using a VGA or DVI signal, you must connect your audio separately because a VGA or DVI signal converts only video data, not audio data.

3.Connecting the HDMI Cable (provided with select models)

Connect one end of the HDMI cable (not provided) to the back of the monitor and the other end to a computer with an HDMI connector.

Figure 3-9Connecting the HDMI cable

High-Bandwidth Digital Content Protection (HDCP)

Your monitor supports HDCP and can receive high-definition content. High-definition content is available in many sources, such as Blu-ray Disc devices or HDTV air or cable broadcasts. If you do not have an HDCP-enabled monitor, you will see a blank screen or a lower resolution picture when

12 Chapter 3 Setting Up the Monitor