HP 2159V, 2309M manual Setting Up the Monitor, Unpacking the Monitor, Installing the Monitor

3

Setting Up the Monitor

Unpacking the Monitor

1.Unpack the monitor. Make sure all contents are included. Store the packing box.

2.Turn off the computer and other attached devices.

3.Determine whether the monitor will be desktop mounted or wall-mounted. See “Installing the Monitor” in this chapter.

4.Prepare a flat area to assemble the monitor. You may need a flat, soft, protected area for placing the monitor screen-down while preparing it for installation.

5.You need a Phillips screwdriver for preparing the monitor for wall-mounting. You may need a straight-slot screwdriver to secure some cables.

Installing the Monitor

You can install the monitor on a desktop or wall-mount it. Place the monitor in a convenient, well-ventilated location near your computer.

Connect the monitor cables after you have installed the monitor.

Preparing the monitor for desktop use

CAUTION: The screen is fragile. Avoid touching or applying pressure to the LCD screen; doing so can cause damage. Unfold the monitor by lifting it from the top edge of the bezel.

1.Set the monitor screen face down on a flat, soft, protected surface.

Unfolding the monitor

2.Grip the base near where it attaches to the monitor with one hand and lift the top part of the monitor until it is unfolded into the desired position.