HP 2159V, 2309M manual High-Bandwidth Digital Content Protection Hdcp, Connecting the Audio Cable

Cable/Adapter (Continued)	Name	Description
	DVI-to-HDMI adapter	Connects a DVI monitor to an HDMI connector on
		the back of the computer, TV, or set-top box or
		connects an HDMI monitor to a DVI connector on
		the back of the computer, TV, or set-top box.
		NOTE: If you use a DVI-to-HDMI adapter, you must
		connect the green audio cable to enable the
		speakers.
	VGA-to-DVI-I cable	Connects a DVI monitor to a VGA connector on the
		back of the computer, TV, or set-top box or connects
		a VGA monitor to a DVI connector on the back of
		the computer, TV, or set-top box.

NOTE: When using a VGA or DVI signal, you must connect your audio separately because a VGA or DVI signal converts only video data, not audio data. A separate audio connection is not necessary when you use an HDMI signal, because an HDMI signal can convert both video and audio data.

High-Bandwidth Digital Content Protection (HDCP)

If your monitor supports HDCP, it can receive high-definition content. High-definition content is available in many sources, such as Blu-ray Disc devices or HDTV air or cable broadcasts. If you do not have an HDCP-enabled monitor, you may see a black screen or a lower resolution picture when playing high-definition protected content. Your computer graphic card and monitor must both support HDCP to display protected content.

Connecting the Audio Cable

Connect the built-in monitor speakers to the computer by using the audio cable, as shown in the following illustration.

Connecting the audio cables—connector locations may vary