Mechanical Specifications, Unit Cabinet

360101-XTG-A-0108

MECHANICAL SPECIFICATIONS

GENERAL DESCRIPTION

Units shall be factory-assembled, single packaged, Electric Cooling units, designed for outdoor mounted installation. They shall have built in, equal size, field convertible duct connections for down discharge supply/return or horizontal discharge supply/return.

The units shall be factory wired, piped, charged with R-22 refrigerant and factory tested prior to shipment. All unit wiring shall be both numbered and color coded.

All units shall be manufactured in a facility certified to ISO 9001 standards, and the cooling performance shall be tested in accordance with ARI test procedures. Units shall be certified to UL 1995/CAN/CSA C22.2 No. 236 standards.

UNIT CABINET

1.Unit cabinet shall be constructed of a combination of G60 and G90 galvanized steel, with exterior surfaces coated with a non-chalking, powdered paint finish, certified at 750 hours salt spray test per ASTMB117 standards.

2.The unit top shall be a single piece “Water Shed” design, with drip edges and no-seam corners to provide optimum water integrity

3.Unit shall have a rigidly mounted condenser coil guard to provide protection from objects and personnel after installation.

4.Indoor blower section shall be insulated with up to 3/4” thick, aluminum, foil faced insulation, fastened to prevent insulation from entering the air stream.

5.Cabinet panels shall be “large” size, easily removable for servicing and maintenance, with built-in lift handles.

6.Unit shall be built on a formed, “Super-Structure” design base pan, with embossments at critical points to add strength, rigidity and aid in minimizing sound.

7.Full perimeter base rails shall be provided to assure reliable transit of equipment, overhead rigging, fork truck access and proper sealing on roof curb applications. Base rails shall be removable, when required, to lower unit height.

8.Filters shall be furnished and be accessible through a removable access door, sealed air tight. (Single phase models - accessory kit available. Three phase models - standard from factory.)

9.Units vertical discharge and return duct configuration shall be designed to fit between standard 24” O.C. beams without modification to building structure, duct work and base unit.

10.Condensate pan shall be internally sloped and conform to ASHRAE 62-89 self-draining standards, with 3/4” NPTI copper, ridged mount connection.

INDOOR (EVAPORATOR) FAN ASSEMBLY

1.Fan shall be direct drive, multi-speed design. Job site selected (BHP) brake horse power shall not exceed the motors nameplate horse power rating.

2.Fan wheel shall be double-inlet type with forward-curved blades, dynamically balanced to operate smoothly throughout the entire range of operation. Airflow design shall be constant air volume.

3.Bearings shall be sealed and permanently lubricated for longer life and no maintenance.

4.Fan assembly shall be “Slip Track” (slide-out) design for easy removal and cleaning.

OUTDOOR (CONDENSER) FAN ASSEMBLY

1.The outdoor fan shall be of the direct-driven propeller type, discharge air vertically, have aluminum blades riveted to corrosion resistant steel spider bracket and shall be statically balanced for smooth operation.

2.The outdoor fan motor shall be totally enclosed with permanently lubricated bearings and internally protected against overload conditions.

REFRIGERANT COMPONENTS

1.Compressors:

a.Shall be fully hermetic reciprocating type, direct drive, internally protected with internal high-pressure relief and over temperature protection. The hermetic motor shall be suction gas cooled and have a voltage range of + or - 10% of the unit nameplate voltage.

b Shall have internal isolation and sound muffling to minimize vibration and noise, and be externally isolated on a dedicated, independent mounting.

2.Coils:

a.Evaporator and condenser coils shall have aluminum plate fins mechanically bonded to seamless internally- enhanced copper tubes with all joints brazed.

bEvaporator and Condenser coils shall be of the direct expansion, draw-thru design.

3.Refrigerant Circuit and Refrigerant Safety Components shall include:

a.Independent fixed-orifice expansion devices.

b.Filter/strainer to eliminate any foreign matter.

c.Accessible service gauge connections on both suction and discharge lines to charge, evacuate, and measure refrigerant pressure during any necessary servicing or troubleshooting, without losing charge and without disrupting condenser or evaporator air flow.

dThe refrigeration system shall provide at least 10° F of liquid sub-cooling at design conditions.

20	Johnson Controls Unitary Products

360101-XTG-A-0108 specifications

The York 360101-XTG-A-0108 is a cutting-edge climate control system designed for residential and commercial applications, delivering optimal heating, ventilation, and air conditioning (HVAC) performance. Renowned for its efficiency and reliability, this model represents the forefront of modern HVAC technology.

One of the main features of the York 360101-XTG-A-0108 is its exceptional energy efficiency. Equipped with advanced variable-speed technology, the system adjusts its operation to match the specific heating and cooling demands of the space. This dynamic functionality allows the unit to maintain consistent temperatures while reducing energy consumption, resulting in significant cost savings on utility bills.

Another key characteristic of the York 360101-XTG-A-0108 is its quiet operation. The system is designed with sound-dampening features, which minimize noise during operation. This makes it an ideal choice for residential areas or commercial environments where noise pollution could disrupt daily activities.

The durability and longevity of the York 360101-XTG-A-0108 are further enhanced by its rugged construction and high-quality components. The unit is equipped with a robust cabinet that protects internal components from the elements, ensuring reliable performance even in harsh climates. Moreover, the advanced refrigerant technology used in this model contributes to its long service life while meeting or exceeding environmental standards.

In terms of control and monitoring, the York 360101-XTG-A-0108 boasts an intuitive user interface and smart connectivity options. It can be integrated with smart home systems, enabling users to manage their HVAC settings remotely via smartphone apps or voice-activated assistants. This connectivity not only enhances user convenience but also allows for proactive maintenance alerts, ensuring the system operates at peak efficiency.

Additionally, the unit features advanced filtration systems that enhance indoor air quality by capturing allergens, dust, and other particulates. This capability is essential for promoting a healthy living environment, particularly for individuals with allergies or respiratory conditions.

Overall, the York 360101-XTG-A-0108 stands out in the HVAC market due to its combination of energy efficiency, quiet operation, durability, smart technology integration, and superior air quality. It is designed to meet the diverse needs of modern spaces, making it a top choice for consumers seeking reliable climate control solutions.