York DJ 048, DJ 036, DJ 060 warranty Other PRE-ENGINEERED Accessories Available, Electric Heaters

Page 45

036-21687-002-A-1105

OPTIONAL OUTDOOR AIR (Shall be made available by

either/or):

•ELECTRONIC ENTHALPY AUTOMATIC ECONO- MIZER- Outdoor and return air dampers that are inter- locked and positioned by a fully-modulating, spring return damper actuator. The maximum leakage rate for the outdoor air intake dampers shall not exceed 2% when dampers are fully closed and operating against a pressure differential of 0.5 IWG. A unit-mounted potenti- ometer shall be provided to adjust the outdoor and return air damper assembly to take in CFM of outdoor air to meet the minimum ventilation requirement of the condi- tioned space during normal operation. During econo- mizer operation, a mixed-air temperature control shall modulate the outdoor and return air damper assembly to prevent the supply air temperature from dropping below 55°F. Changeover from compressor to economizer oper- ation shall be provided by an integral electronic enthalpy control that feeds input into the basic module. The out- door intake opening shall be covered with a rain hood that matches the exterior of the unit. Water eliminator/fil- ters shall be provided. Simultaneous economizer/com- pressor operation is also possible. Dampers shall fully close on power loss.

•MOTORIZED OUTDOOR AIR DAMPERS - Outdoor air dampers are positioned by a 2-position,spring-return damper actuator. The maximum leakage rate for the out- door air intake dampers shall not exceed 2% when dampers are fully closed and operating against a pres- sure differential of 0.5 IWG. A unit-mounted potentiome- ter shall be provided to adjust the outdoor damper assembly to take in the design CFM of outdoor air to meet the ventilation requirements of the conditioned space during normal operation. Whenever the indoor fan motor is energized, the dampers open up to one of two pre-selected positions - regardless of the outdoor air enthalpy. Dampers return to the fully closed position when the indoor fan motor is de-energized. Dampers shall fully close on power loss.

OTHER PRE-ENGINEERED ACCESSORIES AVAILABLE

•ROOF CURB - 14"and 8” high, full perimeter curb with wood nailer (shipped knocked-down).

•BAROMETRIC RELIEF DAMPER - Contains a rain hood, air inlet screen, exhaust damper and mounting hardware. Used to relieve internal air pressure through the unit.

•PROPANE CONVERSION KIT - Contains new orifices and gas valve parts to convert from natural to L.P. gas. One per unit required.

•HIGH ALTITUDE - NATURAL GAS - Contains orifices required for applications between 2000 and 6000 feet altitude.

•HIGH ALTITUDE - PROPANE GAS - Contains orifices required for applications between 2000 and 6000 feet altitude. Must be used with propane conversion kit.

•LOW NOX - Required to reduce the emission of nitrogen oxides below 40 nanograms per joule.

•GAS PIPING - Contains 1/2” pipe nipples, fittings and gas cock (including panel assess gaskets) required for bottom gas supply connection with external shut off.

•POWER EXHAUST OPTION - To work in conjunction with economizers.

•ELECTRIC HEATERS

•ECONOMIZER/MOTORIZED DAMPER RAIN HOOD - Contains all hood panels and the hardware for assem- bling.

•MANUAL OUTDOOR AIR DAMPER

•COIL GUARD KIT - Guard for cooling coil.

•HAIL GUARD

•FLUE EXHAUST EXTENSION

OTHER FACTORY INSTALLED OPTIONS

•POWER EXHAUST OPTION - To work in conjunction with economizers.

•STAINLESS STEEL HEAT EXCHANGER

•STAINLESS STEEL DRAIN PAN

•BOTTOM DRAIN CONNECTION

•TECHNICOAT PHENOLIC COATED CONDENSER AND EVAPORATOR COIL

•ELECTRONIC SINGLE ENTHALPY ECONOMIZER

•DIRTY FILTER SWITCH

•PHASE MONITOR

•COIL GUARD

•POWERED GFI CONVENIENCE OUTLET

•NON-POWERED GFI CONVENIENCE OUTLET

•BAS CONTROLS (Simplicity™ INTELLI-Comfort™,

CPC, JOHNSON, HONEYWELL, NOVAR)

•BAS READY ECONOMIZER (BELIMO ACTUATOR WITHOUT A CONTROLLER)

•HINGED FILTER DOOR ACCESS AND TOOLESS ACCESS PANELS

•2" PLEATED FILTERS

•DISCONNECT SWITCH

•SUPPLY AIR SMOKE DETECTOR

•RETURN AIR SMOKE DETECTOR

Unitary Products Group

45

Page 44 Page 46
Image 45
Page 44 Page 46
Contents Description WarrantyTable of Contents $LUIORZ Product NomenclatureProduct Nomenclature Johnson UNT Controller, DFS, APS, SS Drain Pan Technicoat Condenser Coil & Dirty Filter Switch Hinged Filter Door & Toolless Access Cabinet 036-21687-002-A-1105 Novar ETC-3 Controller, DFS, APS, SS Drain Pan Hinged Filter Door & Toolless Access Cabinet Features Unit Cutaway FACTORY-INSTALLED OptionsFIELD-INSTALLED Accessories GAS Heat RATINGS1 Capacity Ratings ARI 210/2401Stage GAS Heat Ratings EER2 SEER3 Sound Model MBH CFM RatingDJ036 Indoor Sound Power Levels Horizontal Ducted Discharge DJ036 Indoor Sound Power Levels Horizontal Ducted InletConfiguration Unit Description / ModelDJ036 Indoor Sound Power Levels Vertical Ducted Discharge DJ036 Indoor Sound Power Levels Vertical Ducted InletDJ048 Indoor Sound Power Levels Horizontal Ducted Discharge DJ048 Indoor Sound Power Levels Horizontal Ducted InletDJ048 Indoor Sound Power Levels Vertical Ducted Discharge DJ048 Indoor Sound Power Levels Vertical Ducted InletDJ060 Indoor Sound Power Levels Horizontal Ducted Discharge DJ060 Indoor Sound Power Levels Horizontal Ducted InletDJ060 Indoor Sound Power Levels Vertical Ducted Discharge DJ060 Indoor Sound Power Levels Vertical Ducted InletMBH DJ036 Cooling Capacities 3 TONDJ048 Cooling Capacities 4 TON DJ060 Cooling Capacities 5 TON RPM AIR Available External Static Pressure IWG1 FlowBHP RPM BHP720 364 764 404 806 443 831 567 874 602 1000 833 564 879 605 1200 876 632 918 667 1300 1000 862 453 901 498 Static Resistances Belt Drive Blower Motor and Drive DataElectric Heater CFM Limitations RESISTANCE, IWG DescriptionDJ036 Tonnage RLA LRA Motor Outlet 036-21687-002-A-1105 Tonnage Voltage RLA LRA Motor Outlet Physical Data Electric Heat Correction FactorsVoltage LIMITATIONS1 Typical Field Power & Control Wiring Typical Power WiringUnit Dimensions 3 5 TON COOLING/GAS Heat Front View Unit with Economizer Rainhood Minimum Clearances Hole Opening Size DIA Used forLocation Clearance Typical Applications Dimension Center of GravityUnit Total Model Size TON Operating Weights LBSBasic UnitGuide Specifications GeneralDescription Unit Controls Unit Operating CharacteristicsGAS Heating Section Single or 2 Stage Electric Heating SectionOther PRE-ENGINEERED Accessories Available Electric HeatersManual Outdoor AIR Damper 036-21687-002-A-1105 036-21687-002-A-1105 036-21687-002-A-1105

DJ 060, DJ 036, DJ 048 specifications

The York DJ series, which includes models DJ 036, DJ 060, and DJ 048, has become a staple in the DJ community, known for their impressive features, robust technologies, and user-friendly characteristics. These models are designed to meet the diverse needs of DJs, from beginners to seasoned professionals, offering a range of functionalities that cater to different performance styles.

The York DJ 036 is particularly favored for its portability and user-centric design. Weighing in at a lightweight, this model is perfect for mobile DJs who need to set up quickly and efficiently. The DJ 036 boasts a built-in mixer with multiple channels, allowing for seamless transitions between tracks. Its intuitive layout makes it easy for users to navigate through various controls, making it ideal for those new to DJing. Additionally, its compatibility with various audio inputs ensures that DJs can connect multiple devices effortlessly, enhancing their creative possibilities.

Moving to the York DJ 060, this model takes things a step further with enhanced functionality and sound quality. The DJ 060 features advanced digital signal processing technology, which ensures crystal-clear audio playback and eliminates unwanted noise. Its loop and cue functions provide DJs with greater control over their sets, allowing for creative mixing and live remixing on the fly. Furthermore, the DJ 060 includes an integrated LED display that provides vital information such as track time and tempo, enabling DJs to keep track of their performance without missing a beat.

Lastly, the York DJ 048 is engineered for those who require a more comprehensive setup. This model integrates a higher number of channels and effects processors, making it perfect for complex performances. The DJ 048 supports MIDI compatibility, enabling DJs to connect various controllers and software, expanding their creative toolbox. The inclusion of high-quality sound outputs ensures that performances are not only dynamic but also rich in quality.

In summary, the York DJ series, particularly the DJ 036, DJ 060, and DJ 048, delivers a compelling combination of portability, advanced technology, and user-friendly features. Each model caters to different levels of expertise and performance requirements, making York a trusted choice among DJs looking for reliable and innovative equipment. Whether for casual gatherings or professional gigs, these models are equipped to elevate any DJ’s performance.
Top Page Image Contents