HP I SCOPE PREPROCESSOR FSI64S manual

Page 16

Operations

Environmental Temperature

Altitude

Humidity

Testing and Troubleshooting

Servicing

information on the electrical loading of the MultiProbe Pod refer to your Hewlett-Packard MultiProbe specification.

All PCI Local Bus operations supported.

Operating:0 to 55 degrees C (+32 to +131 degrees F)

Non operating:-40 to +75 degrees C (-40 to +167 degrees F)

Operating: 4,6000m (15,000 ft)

Non operating: 15,3000m (50,000 ft)

Up to 90% non condensing. Avoid sudden, extreme temperature changes which would cause condensation on the preprocessor module.

There are no automatic performance tests or adjustments for the PCI Scope Preprocessor module. If a failure is suspected in the PCI Scope Preprocessor module contact the factory or your FuturePlus Systems authorized distributor.

The repair strategy for the PCI Scope Preprocessor is module replacement. However, if parts of the PCI Scope Preprocessor module are damaged or lost contact the factory for a list of replacement parts.

16

Image 16
Contents FuturePlus Systems Corporation For Hewlett-Packard Logic Analysis Systems RevisionHOW to Reach US Product Warranty Signal Connections for the MultiProbe POD How to reach us Product Warranty Limitation of warrantyAssistance How to Use This Manual IntroductionAnalyzing the PCI Local Bus Duplicating Master Diskette Accessories SuppliedMinimum Equipment Required Page Connecting the MultiProbe Control Card to an Oscilloscope Installation Quick Reference Analog AnalysisSelecting the PCI signals to acquire Select the scope that you will useAcquiring signals with an Oscilloscope Access the oscilloscope menusPCI Personality Adapter option Characteristics General InformationPage Signal Connections for the MultiProbe PODFRAME# PAR64 AD45 AD46 AD47 AD48 AD49 199 201 203 205 207