(http://www.microsoft.com/licensing/programs/sa/support/winpe.mspx). For more information about the net use command, enter net help use at the command prompt.
Because startnet.cmd is stored in the WinPE_Directory\Platform\system32 directory, command files listed in startnet.cmd are relative to the directory. Use the default system variables SystemDrive and SystemRoot to specify paths to the utilities. Be sure that the contents of the file are accurate and tested before using it widely.
Creating required data files with Windows PE
Some Toolkit utilities require data files as input arguments to provide detailed settings for the system. You can build data files manually to use with the utilities, but Toolkit utilities can also capture existing configuration data files from a server that can then be customized to use with other servers.
NOTE: For more information about using the Toolkit utilities and building data files manually, refer to the HP SmartStart Scripting Toolkit Linux and Win32 Editions User Guide, located on the Toolkit website (http://www.hp.com/servers/sstoolkit).
SmartStart Scripting Toolkit Win32 Edition utilities are only supported in a Win32 environment. They can run in either Windows® or Windows® PE. To use the Toolkit utilities in a Windows® PE environment, Windows® PE must be built with the latest HP drivers to ensure the utilities can access the hardware. For more information, refer to "Microsoft Windows Preinstallation Environment (on page 5)."
No restrictions are placed on file naming. However, if data files for various servers are placed on an installation
•
•
•
•
•
•
•
•
•
•
•
•
The following examples assume a floppy disk, but other media (CD, PXE, USB drive key) are also acceptable. To generate the data files on the source server:
1.Generate the hardware configuration data file with the following command:
CONREP /S A:\HWCONFIG.XML
Configuring HP ProLiant systems with Windows PE 9