HP manual Specifications, 1HP Compaq t5135/t5530 Thin Client

Page 19

3 Specifications

Table 3-1HP Compaq t5135/t5530 Thin Client

Dimensions

 

 

Width (front to back)

7.31 in.

18.57 cm

 

 

Height (top to bottom)

7.31 in

18.57 cm

 

 

Depth

2.06 in.

5.24 cm

 

 

 

 

 

Approximate Weight

2.9 lb

1.3 kg

 

 

 

Temperature Range (fanless design)*

 

 

Operating**

50° to 104° F

10° to 40° C

(max. rate of change is 10° C per hour or 18° F per hour)

 

 

Nonoperating

-22° to 140° F

-30° to 60° C

 

 

(max. rate of change is 20° C per hour or 36° F per hour)

 

 

 

 

*Specifications are at sea level with altitude derating of

** The operating temperature range when the thin client

1° C/300m (1.8° F/1000ft) to a maximum of 3Km (10,000ft),

is attached to a flat panel using the HP Quick Release

with no direct, sustained sunlight. Upper limit may be limited

is 50° to 95°F (10° to 35°C).

 

by the type and number of options installed.

 

 

 

 

 

Relative Humidity (non-condensing)

 

 

Operating

10–90%

10–90%

(max. wet bulb temperature is 28° C or 84.2° F)

5–95%

5–95%

Nonoperating

 

 

(max. wet bulb temperature is 38.7° C or 101.6° F)

 

 

 

 

 

Maximum Altitude (unpressurized)

10,000 ft

 

Operating

3048 m

 

(max. allowed rate of change is 457m per minute or 1500

 

 

ft per minute)

30,000 ft

 

Nonoperating

9144 m

 

(max. allowed rate of change is 457m per minute or 1500

 

 

ft per minute)

 

 

 

 

 

Power Supply

100–240 VAC

100–240 VAC

Operating Voltage Range

50–60 Hz

50–60 Hz

Rated Line Frequency

 

 

 

 

 

Power Output (maximum)

40 W, 50 W

40 W, 50 W

 

 

 

Rated Output Current (maximum)

3.3 A, 4.16 A

3.3 A, 4.16 A

 

 

 

ENWW

13

Image 19
Contents Hardware Reference Guide Hardware Reference Guide About This Book Iv About This Book Table of contents Shipping information Standard features Product featuresFront panel components Rear panel components Secure USB compartment portsRemoving the stand Installing the standCtrl key Using the keyboardWindows Logo Key Special mouse functionsAdditional function keys Serial number location 7Serial number location Product featuresInstalling USB devices in the secure USB compartment General hardware installation sequenceHardware changes 1Removing the secure USB compartment cover Hardware changes Removing the secure USB compartment coverReplacing the secure USB compartment cover Installing the USB deviceRemoving the side access panel and metal side cover Replacing the batteryReplacing the metal side cover and side access panel Removing and replacing the batteryExternal drives 1HP Compaq t5135/t5530 Thin Client SpecificationsSecuring the thin client Security provisionsHP Quick Release Mounting the thin client2Connecting the HP Quick Release to the thin client Supported mounting options 4Connecting the thin clientEnww 8Thin client mounted under desk Non-supported mounting optionRoutine thin client care Thin client operationSupported orientations 3Under monitor stand Non-supported orientationEnww Preventing electrostatic damage Electrostatic dischargeGrounding methods Shipping information Important service repair informationShipping preparation
Related manuals
Manual 34 pages 25.26 Kb