Appendix
A
In This Appendix
Set Up Codes |
Tip
Do not point your remote control directly towards the iPAQ Music Center while setting codes.
Programming your Remote Control
1.Press and hold the
Code Set button
Aon the remote control for 3 seconds. The LED will blink twice.
2.Press the A/V PWR button and enter the first 4 digit code for your brand. The LED will blink twice to confirm a valid code has been programmed.
3.Press the A/V PWR button. Your A/V receiver should turn off. If your A/V receiver does not respond, repeat steps
4.To program the TV, repeat steps
IPAQ MUSIC | APPENDIX |