HP COMBI 2180206H manual T00022

Page 10

Combi HP thermostatic mixer shower

Fig.13

Fig.14

T00232T00233

Fig.15

T00234

Fig.16

Outlet

Adaptor

‘O’ Ring

T00237

 

 

Fig.17

Hose end

Pipe end

 

(flat)

(chamfered)

T00022

screws are slack allowing the inlet elbows to rotate to the correct position and move freely in and out of the valve housing (fig.8).

Place the valve housing centrally between the two pipes, and mark the two diagonal fixing

holes (figs.9 and 10).

Remove the valve. Drill and plug the holes. (The wall plugs supplied are suitable for most brick walls

use an appropriate masonry drill, but if wall is plasterboard or a soft building block, you must use suitable wal lplugs and an appropriate drill bit).

Fit the nut covers on to the pipes (fig.11).

Note: Slide the pipes into the small diameter end of the nut cover. It will not fit if inserted from the other end.

Slide the inlet nuts and olives onto the pipes, followed by the inlet trims.

Note: The holes in the inlet trims are offset to allow for adjustable inlet pipe separation widths. If pipe centre separation is 153 mm or less, then have the short side of the inlet trims between the pipes. If the pipe separation gap is 153 mm or greater, have the long side of the inlet trims between the pipes (fig.12). If in any doubt try the cover to see if it fits properly (i.e. no visible gaps between the inlet trims and the cover — fig.13). If there is a gap (fig.14) then reverse the trim.

While trying the cover make sure the inlet nuts are sitting in the holes in the inlet trim holes so that the inlet trims are at the correct separation.

Having positioned the inlet trims correctly, refit the valve to the pipework. Make sure the hot inlet port (marked with the letter ‘H’ on the valve housing) is connected to the hot pipework which must be on the left.

Screw to the wall with the two screws supplied (fig.15). Tighten the inlet nuts and inlet elbow grub screws.

If installing a tamperproof fixed head, fit the outlet adaptor into the top outlet hole in the valve housing (fig.16). The adaptor is sealed with an ‘O’ ring. Make sure the adaptor is fitted with the hose end in the valve housing. Fit the blanking plug into the bottom outlet hole using an ‘O’ ring to seal it.

Image 10
Contents Combi HP Contents Safety Warnings INTRODUCTIOntroduction NMAINain componentsCOMPONENTS Do not use jointing compounds on the pipework Pump assisted gravity fed systems Instantaneous gas-heated showers, e.g. combination boilersUnvented mains pressure showers Mains pressurised thermal store T00223008-A Exposed Rising and falling suppliesT00022 If fitting a tamperproof fixed head, refer to Rear entry supplies T00245 T00246 T00247 004-A Flush fit Shower to the WallSolid wall T00251 T00252 Behind the lock washer Hollow wall Remove the flush mount plate then Shower cubicle or panel T00265 T00266 T00267 T00268 FLUSHINGlushing procedurePROCEDURE Removal and/or fitting of check valves for maintenanceHead Fitting the Tamperproof FixedExposed option only Built in option only T00284 T00082 Riser rail option onlyStarting the shower Adjusting the shower temperatureTing the Shower Stopping the showerAdjusting the Maximum ProcedureSpare Parts Ref. Description1617 Fault Finding Problem/Symptom CauseProblem/Symptom Cause Action/Cure Combi HP thermostatic mixer shower Combi HP thermostatic mixer shower Combi HP thermostatic mixer shower Service Policy

COMBI 2180206H specifications

The HP COMBI 2180206H is a versatile and efficient printer that caters to the diverse needs of both home and office users. Designed for high performance and reliability, this all-in-one device excels in delivering outstanding print quality, exceptional speed, and a range of features that enhance productivity.

One of the standout features of the HP COMBI 2180206H is its all-in-one capability, which allows users to print, scan, copy, and fax documents with ease. This multifunctionality saves valuable space and eliminates the need for multiple devices. Its compact design ensures that it fits seamlessly into any workspace, making it an excellent choice for small office environments or home use.

The printing technology employed in the HP COMBI 2180206H is based on HP's innovative thermal inkjet technology, which ensures vibrant color reproduction and sharp text output. With a print resolution of up to 4800 x 1200 dpi, users can expect professional-grade documents that reflect high-quality standards. Additionally, it offers impressive print speeds, capable of producing up to 22 pages per minute for black-and-white prints and 18 pages per minute for color documents.

One of the key characteristics of the HP COMBI 2180206H is its connectivity options. It supports wireless printing, enabling users to print from their smartphones, tablets, and laptops without the need for cumbersome cables. With built-in Wi-Fi and support for HP Smart app, users can manage their printing tasks easily, scan documents directly to their devices, and even order supplies when needed.

The printer is also equipped with a user-friendly control panel that features an LCD screen, making navigation straightforward. Users can quickly access various functions, customize settings, and monitor ink levels with just a few taps. This ease of use is complemented by a range of automated features, such as automatic two-sided printing, which helps save paper and reduce operational costs.

In terms of ink efficiency, the HP COMBI 2180206H uses individual cartridges, allowing users to replace only the color that runs out, further enhancing cost-effectiveness. With the option to use high-yield cartridges, users can print more pages before needing replacements.

Overall, the HP COMBI 2180206H stands out as a robust all-in-one printer that combines cutting-edge technology, user-friendly features, and high-quality performance, making it an ideal solution for anyone looking to enhance their printing experience. Its combination of speed, efficiency, and versatility make it a valuable addition to any home or office workspace.