HP COMBI 2180206H manual INTRODUCTIOntroduction N, Safety Warnings

Page 3
g. Do not operate the shower outside the
C-006-A
guidelines as laid out in ‘site requirements’.

Combi HP thermostatic mixer shower

INTRODUCTIOntroduction N

Safety warnings

This book contains all the necessary fitting and operating instructions for your Triton high pressure thermostatic mixer shower. Please read them carefully.

Please read through the whole of this book before beginning your installation.

The installation MUST be carried out by a suitably competent person and in sequence of this instruction book.

Care taken during the installation will give a long and trouble free life from your mixer shower.

Thermostatic mixers will automatically maintain your chosen temperature, even if taps are turned on elsewhere in the house, and shut off if either the hot or cold supply fails.

For the best performance within the specified running pressure range a minimum flow of eight litres per minute should be available to both inlets.

The mixer shower MUST NOT be subjected to water temperatures above 80°C.

This mixer is designed to operate on higher pressure systems found in the UK up to a maximum of 5 bar running pressure.

The high pressure valve is suitable for modulating type combination boilers and multi-point hot water heaters. It is also suitable for thermal storage, unvented systems and pumped gravity systems.

IMPORTANT: Before installing with a gas instantaneous water heater, make sure it is capable of delivering hot water at a minimum switch-on flow rate of 3 litres per minute. At flow rates between 3 and 8 litres per minute, the appliance must be capable of raising the water temperature to a minimum of 52°C.

The water temperature at the inlet to the mixer must remain relatively constant when flow rate adjustments are made.

Inlet connections are by compression fittings for 15 mm copper pipe.

This valve unit is supplied with a mounting bracket to suit installation in a chased out cavity in a solid wall, a stud partition wall, dry lined wall or fixing to a shower cubicle or panel.

SAFETY WARNINGS

a.Layout and sizing of pipework MUST be such that when other services are used, pressures at the shower control inlets do not fall below the recommended minimum.

b.DO NOT choose a position where the shower could become frozen.

c.The outlet of this appliance MUST NOT be connected to any form of tap or fitting not recommended by the manufacturer.

d.The showerhead MUST be regularly cleaned to remove scale and debris.

e.Conveniently situated isolating valves in each inlet supply MUST be fitted as an independent method of isolating the shower should maintenance or servicing be necessary.

f.If it is intended to operate the shower in areas of hard water (above 200 ppm temporary hardness), a scale inhibitor may have to be fitted. For advice on the Triton scale inhibitor, please contact Customer Service.

Replacement parts canY-be003ordered-Afrom Customer Service. See ‘spare parts’ for details and part numbers.

Y-002-A



Page 2 Page 4
Image 3
Page 2 Page 4
Contents Combi HP Contents INTRODUCTIOntroduction N Safety WarningsMAINain componentsCOMPONENTS Do not use jointing compounds on the pipework Instantaneous gas-heated showers, e.g. combination boilers Pump assisted gravity fed systemsUnvented mains pressure showers T00223 Mains pressurised thermal store008-A Rising and falling supplies ExposedT00022 If fitting a tamperproof fixed head, refer to Rear entry supplies T00245 T00246 T00247 004-A Shower to the Wall Flush fitSolid wall T00251 T00252 Behind the lock washer Hollow wall Remove the flush mount plate then Shower cubicle or panel T00265 T00266 T00267 T00268 Removal and/or fitting of check valves for maintenance FLUSHINGlushing procedurePROCEDUREFitting the Tamperproof Fixed HeadExposed option only Built in option only T00284 Riser rail option only T00082Stopping the shower Adjusting the shower temperatureTing the Shower Starting the showerProcedure Adjusting the MaximumRef. Description Spare Parts1617 Problem/Symptom Cause Fault FindingProblem/Symptom Cause Action/Cure Combi HP thermostatic mixer shower Combi HP thermostatic mixer shower Combi HP thermostatic mixer shower Service Policy

COMBI 2180206H specifications

The HP COMBI 2180206H is a versatile and efficient printer that caters to the diverse needs of both home and office users. Designed for high performance and reliability, this all-in-one device excels in delivering outstanding print quality, exceptional speed, and a range of features that enhance productivity.

One of the standout features of the HP COMBI 2180206H is its all-in-one capability, which allows users to print, scan, copy, and fax documents with ease. This multifunctionality saves valuable space and eliminates the need for multiple devices. Its compact design ensures that it fits seamlessly into any workspace, making it an excellent choice for small office environments or home use.

The printing technology employed in the HP COMBI 2180206H is based on HP's innovative thermal inkjet technology, which ensures vibrant color reproduction and sharp text output. With a print resolution of up to 4800 x 1200 dpi, users can expect professional-grade documents that reflect high-quality standards. Additionally, it offers impressive print speeds, capable of producing up to 22 pages per minute for black-and-white prints and 18 pages per minute for color documents.

One of the key characteristics of the HP COMBI 2180206H is its connectivity options. It supports wireless printing, enabling users to print from their smartphones, tablets, and laptops without the need for cumbersome cables. With built-in Wi-Fi and support for HP Smart app, users can manage their printing tasks easily, scan documents directly to their devices, and even order supplies when needed.

The printer is also equipped with a user-friendly control panel that features an LCD screen, making navigation straightforward. Users can quickly access various functions, customize settings, and monitor ink levels with just a few taps. This ease of use is complemented by a range of automated features, such as automatic two-sided printing, which helps save paper and reduce operational costs.

In terms of ink efficiency, the HP COMBI 2180206H uses individual cartridges, allowing users to replace only the color that runs out, further enhancing cost-effectiveness. With the option to use high-yield cartridges, users can print more pages before needing replacements.

Overall, the HP COMBI 2180206H stands out as a robust all-in-one printer that combines cutting-edge technology, user-friendly features, and high-quality performance, making it an ideal solution for anyone looking to enhance their printing experience. Its combination of speed, efficiency, and versatility make it a valuable addition to any home or office workspace.
Top Page Image Contents