Emulex CNA media specifications

The CNA does not ship with cable media. Select either the fiber optic or copper cabling option, and purchase the parts separately (see Table 5 (page 23)).

Table 5 Fiber optic and copper cabling parts

Media type	Supported media
Supported SFP+ optical	• HP BLc 10Gb SR SFP+ (part number 455883-B21)
media

Supported copper media for connection to B-series switches

Supported copper media for connection to C-series switches

Supported copper media for connection to HP A5820X-14XG-SFP+ switches

•HP 1m B-series Active Copper SFP+ Cable (part number AP818A)

•HP 3m B-series Active Copper SFP+ Cable (part number AP819A)

•HP 5m B-series Active Copper SFP+ Cable (part number AP820A)

•HP 3m C-series Passive Copper SFP+ Cable (part number AP784A)

•HP 5m C-series Passive Copper SFP+ Cable (part number AP785A)

•HP 7m C-series Active Copper SFP+ Cable (part number QK701A)

•HP 10m C-series Active Copper SFP+ Cable (part number QK702A)

•HP X240 SFP+ SFP+ 0.65 m Direct Attach Cable (part number JD095B)

•HP X240 SFP+ SFP+ 1.2 m Direct Attach Cable (part number JD096B)

•HP X240 SFP+ SFP+ 3 m Direct Attach Cable (part number JD097B)

CAUTION: Take care not to plug optical cables into cages without transceivers in them.

NOTE: A CNA does not allow data transmission on either 10 Gb optical or copper link unless it is connected to a compatible optical or copper interface connection (that is, multimode to multimode). See the appropriate CN switch QuickSpec for the appropriate media supported by your switch.

Emulex CNA media specifications 23