HP CC-330 manual Video System, Connecting to a PC, Setting the USB mode

Page 37

Transmission

Video System

Use this setting to determine your video system in the current area.

1.Select the Video System in Connection Setup menu.

2.Use the Up/Down navigation buttons to select NTSC or PAL.

Then press the button to confirm.

The video output signal can be switched to NTSC or PAL to accommodate different regional standards. The appropriate setting will vary between regions.

NTSC

USA, Canada, Taiwan, Japan, etc.

 

 

PAL

Europe, Asia (excluding Taiwan), Oceania, etc.

 

 

Note: The TV output will not display properly if an incorrect video system is selected.

Connecting to a PC

Use the USB cable and ArcSoft software (CD-ROM) supplied with your camera to copy (transfer) pictures to a computer.

Setting the USB mode

Since the camera’s USB port can be set to connect with either a PC or a Printer, the following steps will allow you to ensure that the camera is correctly configured to connect with a PC.

1.Go to the camera setting menu, select USB connection with the Up/Down button, and press the Right button.

2.Use the Up/Down navigation buttons to select PC.

3.Press the button to confirm the setting.

Transferring photos and videos to your PC

If your computer or Laptop has a SD/SDHC card reader, it is easier to transfer photos and videos from the camera's memory card directly. However, if your system does not have a SD/SDHC card reader, you can use the USB connection between the camera and computer/Laptop.

The computer will automatically detect the camera as a removable drive. Double-click My Computer icon on the desktop to locate the removable drive and to copy the folders and files in the drive to a directory on your PC as you would copy any typical folder or file.

By using the USB cable, you can transfer the captured photos and videos

to a PC. Follow the steps below to connect the camera to a PC.

1. Start a computer to which the Nero software has been installed. 2. Make sure both the camera and PC are turned on.

3.Connect one end of the supplied USB cable to the USB/AV OUT

port on your camera.

4. Connect the other end of the cable to an available USB port on your PC.

5.Disconnect the camera once transfer is completed.

35

Page 36 Page 38
Image 37
Page 36 Page 38
Contents CC330 Page For customers in Europe FCC StatementBattery notes Safety PrecautionsCamera notes Memory card notesBefore YOU Start Safety informationPreface CopyrightLCD Screen notes About this manual Symbols used in this manualContents Using the Modes Using the Menus Transmission Connecting to a PictBridge Compatible Printer Unpacking Getting ReadyCamera Views Left / Right View Insert the Battery and SD/SDHC Card Not included Turning On and Off Using the Mode ButtonSetting the Language Setting Date/Time and LanguageSetting the Date and Time Using the Zoom Function Shooting in Auto ModeBasic Operation Basic Functions MenuMacro Mode Self-timerFlash Exposure CompensationSize Advanced Functions MenuQuality Color WB White BalanceStill Picture Mode Display Using the ModesLCD Screen Display Playback mode display Video Shooting Mode DisplayMode Icon Description Name Scene modePanorama mode Face Detection Stabilization modeBlink Detection Smile DetectionViewing Photos and Videos PlaybackThumbnail View Using the Delete Button Using Zoom Playback for still pictures onlyAF Mode Auto-Focus mode Using the MenusStill Menu Continuous AFDate Imprint Continuous ShotQuick Review Digital ZoomPlayback Menu Movie MenuProtect Dpof Digital Print Order Format DeleteResize TrimRotate Red-eye ReductionWallpaper Settings Display SetupSlideshow Menu WallpaperSet back to defaults Setup MenuStartup Screen BeepLCD Brightness Power SaverZone Date/TimeFile and Software Reset SettingsFormat Memory File NumberingSetting the USB mode Connecting to a PCVideo System Transferring photos and videos to your PCConnecting the camera and printer Connecting to a PictBridge Compatible PrinterPrint with date Using the PictBridge MenuPrint without date Print Dpof Digital Print Order Format Print indexExit Appendices SpecificationsMessages Explanation Error messagesProblem Possible causes Solution TroubleshootingContact/phone Support Language Getting HelpNorth America Page 7525C00257A
Top Page Image Contents