HP 2011x/2011s, 2211f/2211x, 2511x manual Connecting the DVI-D Video Cable Select Models

Connecting the DVI-D Video Cable (Select Models)

Connect one end of the DVI-D video cable to the back of the monitor and the other end to the DVI-D video connector on the computer. You can use this cable only if your computer has a DVI compliant graphics card that is either integrated or installed. The DVI-D connector and cable are included with select models.

Figure 3-4Connecting the DVI-D Cable (cable provided with select models only)

Connecting the HDMI Cable (Select Models)

Connect one end of the HDMI cable to the back of the monitor and the other end connector to the input device. The HDMI cable is included with select models.

NOTE: The audio stream must be connected directly to external speakers or to an audio receiver.

Figure 3-5Connecting the HDMI Cable (cable provided with select models only)

ENWW Connecting Monitor Cables 9