HP F1703 manual Setting Up the Monitor, Connecting the power and video cables

hp pavilion f1503/f1703 LCD Monitor Setting Up the Monitor

Setting Up the Monitor

Place the monitor on a flat, sturdy surface. Ensure that the operating site is free from excessive heat and moisture. For best performance, make sure nothing is resting on the monitor.

Connecting the power and video cables

Before you connect any cables or install the HP monitor, refer to the safety instructions at the beginning of this manual. Refer also to the documentation that came with the computer to ensure this equipment is correctly installed.

Look at the following diagram and follow the steps listed below to connect the cables to the f1503 15-inch LCD monitor or the f1703 17-inch LCD monitor.

	Speaker
	VGA
	Speaker
	power cable
DC adapter	Power
	cord
with attached
DC cable
Video cable	Power
(VGA)
	source

CAUTION: These monitors are equipped with an auto-sensing power supply for voltage ranges 100—240 V , 50/60 Hz. Use the monitor with the supplied DC adapter only.

11 English X