hp pavilion f1503/f1703 LCD Monitor Setting Up the Monitor
To connect the cables to the f1503/f1703 monitor:
1 Turn off the computer.
2Plug the video cable into the video connector (VGA) on the back of the monitor and into the corresponding video connector on the computer. Secure the cable by tightening the thumbscrews.
3Plug the DC adapter cable into the connector on the back of the monitor.
4Plug the power cord into the DC adapter and into the main power source. Refer to the warnings in “Important Safety Instructions” on page 4 for power source connection requirements.
5Turn on the main power source (for example, a surge protector), and then turn on the power switch for both the computer and the monitor.
To disconnect the cables from the f1503/f1703 monitor:
1Turn off the power switch for the monitor and the computer and then turn off the main power source.
2Disconnect the power cord from the main power source and from the DC adapter cable.
3Disconnect the DC adapter cable from the connector at the back of the monitor.
4Unscrew the thumbscrews on the video cable and disconnect the video cable.
12 | English | X |