Setting the DPOF
The Digital Print Order Format (DPOF) setting allows you to select images on the memory card for printing and specify the number of print copies in advance using the camera. This is extremely convenient for sending the images to a photo developing service or for printing on a direct print function compatible printer.
1
2
4
5
Turn the power on, and set the camera to the PLAYBACK mode ( page 13).
Open the menu.
Press the MENU button,
then use the
control to select DPOF () and press the OK
button.
or to select [Single], then press the OK button.
To set the DPOF setting for all images, select [All] in this step.
To reset all DPOF settings to initial default, select [Reset] in this step.
Pressorto select the image you want to print out.
Set the number of copies.
Press or to specify the number of copies.
The number of copies can be set from 0 to 99.
To cancel this image DPOF setting, set the number of copies to 0.
6Print the date stamp out.
Press Mode button to set the date stamp of current image. Press SCN button again to turn off date stamp.
Repeat step 4~6 to other images for printing.
7After you finished all image settings, press the OK or MENU button to apply it.
51