Enww

3Charging the headphones and Bluetooth adapter (select models only)

Before you can use the headphones with the provided Bluetooth adapter (select models only), you must charge both the headphones and the Bluetooth adapter. The headphones can be charged from the USB port on your computer or the provided AC adapter ( select models only).

To charge the headphones, complete the following steps:

CAUTION: When removing the USB charging cable from a device, prevent damage to cable connectors by grasping each connector and then pulling gently. Do not pull on the cable to remove it from the device.

1.Be sure that the Bluetooth switch and the noise cancellation switch are in the off position, with no red indicator visible at the open end of the switch.

2.Plug one of the two Mini-USB connectors into the Mini-USB port on the headphones (1). The charging light (2) will turn on while the headphones are charging.

3.Plug the other Mini-USB connector into the Mini-USB port on the Bluetooth adapter (3). The Bluetooth light (4) will turn on while the adapter is charging.

Chapter 3 Charging the headphones and Bluetooth adapter (select models only)

Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/